Примери за използване на Excess glue на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Rag to remove excess glue.
Excess glue must be removed.
Scraper- to remove excess glue.
Remove excess glue formed, and too protruding ends of the rods cut with scissors or clippers.
Cyclin- They remove excess glue with knives.
Quick-drying, does not cause wrinkles or excess glue.
G Wipe away the excess glue with kitchen paper.
Scraper aggregates- for removing excess glue.
A flexible spatula is needed to remove excess glue in hard-to-reach places, such as corners, joints.
To do this,you need to carefully inspect the floor and remove excess glue.
During operation, you should try to remove all excess glue protruding from the tiles and joints.
After the wallpaper is pasted, the wallpaper is smoothed over the entire surface,removing excess glue and air.
Excess glue should immediately clean cloth, or after drying remain brilliant tracks that will be treacherous issue seams.
Cloth/ sponge to remove excess glue, grout.
This will firmly press the wallpaper on the entire wall surface to remove air bubbles and excess glue.
Excess glue for the aquarium from the glass should be removed with a cloth previously moistened with a solution of water and vinegar.
It is necessary tosmooth the wallpaper so as to remove air and excess glue from under the canvas.
Remove excess glue around the edges with a spatula and causes a new glue for the next batch of tiles.
This is a glue tray that has a special surface for removing excess glue from the roller.
The excess glue immediately remove from the surfacelaminate with a damp cloth, and then you have to deal with more and scrubbing the floors of dried droplets which are not so easy to agree to leave the"long occupied a place.".
The final stage. We collect warm water and gently my tile,removing excess glue and grout from the wall surface.
To do this, first apply a smooth layer of glue on the tile, with a tooth-trowel equalize and glue it to the surface,removing immediately all excess glue.
Such simple manipulations will allow you to remove excess glue and create a uniform device of the slats during the polymerization.
Teflon is stuck on the machine protecting the transfer platform,it can be wiped with a cloth when excess glue or ink stains the platform.
After the strip of wallpaper is pasted on the wall-Cut off excess wallpaper from the top and bottom,remove excess glue with a rag.
If the plastic wrapping of the perfume box is sealed in an unattractive way(the seam is more than 5 mm wide,it is uneven, or it has excess glue on it), then the perfume isn't authentic.
If the plastic wrapping of the perfume box is sealed in an unattractive way(the seam is more than 5 mm wide,it is uneven, or it has excess glue on it), then the perfume isn't authentic.
If the plastic wrapping of the perfume box is sealed in an unattractive way(the seam is more than 5 mm wide,it is uneven, or it has excess glue on it), then the perfume isn't authentic.
Attach to the edge of the countertop 1 whole leaf mosaic wrong side, that is, the paper up to one of the corners of the table, press,remove the excess glue with a sponge dipped in water.
To close the glue, that is, the early closing of the glue interval means that in the continuous track coating, the plastic head is closed before reaching the end point, andthe residual pressure and the excess glue are used to finish the final section of the track to avoid the pile of glue. i.e.