Примери за използване на Finished solution на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The development of the finished solution.
The finished solution has milky white color.
You will discover all finished solutions there.
The finished solution will resemble milk in color.
M2 consumption is about 5 liters of the finished solution.
Pouring the finished solution into a fixed form.
You will certainly discover all finished solutions there.
The finished solution will resemble milk in color.
The first and main difficulty is the cracking of the finished solution during the drying process.
The finished solution must be used within 20 minutes.
For a single section,the operating time with the finished solution should not exceed an hour and a half.
The finished solution is placed in a dark place for 3 weeks.
Dilute the tile adhesive so that you use the finished solution for 15, a maximum of 20 minutes.
The finished solution rubbed the inflamed area of the skin or added to a compress.
Deficiencies which are mentioned on the inžekciitesa their high price andthe short shelf life of the finished solution.
The weight of the finished solution is net= 888 grams.
The finished solution is removed from the discharge compartment, which is located at the bottom of the tank.
This volume allows for one load to get 7-10 buckets of the finished solution, which is usually enough for construction work of any type.
The finished solution can be stored in the refrigerator(at a temperature of from 2° to 8 °C) during 4 weeks.
First of all,it is required to determine the required one-time productivity(about five buckets of the finished solution are enough for a manual concrete mixer).
But when the five liters of the finished solution ran out, he refused to dilute the remedy further.
On the side surface of the container a rectangular hole is cut in the size of 30x35 cm(a hatch for loading the mixture components and unloading the finished solution).
High Pressure determination The finished solution should be clear and transparent after high temperature, no milk light, no precipitation.
Category for power LEDs, suitable for interior, exterior, basic and decorative lighting and lighting for extra features: general lighting, conventional and saltwater aquariums, lighting for jewelry stores, light fruit, vegetables, fresh meat andother spesial lighting which can offer all necessary components and finished solution.
The life cycle of the finished solution is 40 minutes, so the dry mixture is divided into portions and the filling is gradually produced.
Category for power LEDs, suitable for interior, exterior, basic and decorative lighting and lighting for extra features: general lighting, conventional and saltwater aquariums, lighting for jewelry stores, light fruit, vegetables, fresh meat andother spesial lighting which can offer all necessary components and finished solution. Tuk will find only quality products to guarantee correct technical parameters of the bargains.
For the finished solution such external qualities as homogeneous consistency, even color and rigidity are typical(the composition should not spread over the surface).
Consumption of the finished solution is 1.5 liters per 10 m², and spraying is best done early in the morning or with the onset of the evening(after sunset), in calm and dry weather.
Hundreds of colorful andtextured ceramic finishing solutions allow you to create unique interiors.
Our concept is to provide customers with a full range of label finishing solutions.