Примери за използване на Foamed polyethylene на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
This may be cork or foamed polyethylene.
FOAMED POLYETHYLENE- rolls for packaging and padding.
PLASTOCELL- sheets extruded foamed polyethylene.
Foamed polyethylene foam combines hydro-, noise-, vapor- and heat-insulating properties.
The roll insulation consists of two layers:foil and foamed polyethylene.
The walls can be insulated with foamed polyethylene both inside and outside.
Foamed polyethylene- one of the modern speciesinsulation, different unique characteristics.
To do this,it is better to use hypoallergenic foamed polyethylene.
Saranex or TIN foamed polyethylene with thickness 1.8- 2 mm and density of 250- 400 kg/m3.
The air cavity between the plasterboard and foamed polyethylene should be 20 mm.
Back PLASTOCELL foamed polyethylene film with added one layer HDPE(high density polyethylene). .
Was built andsince then the company produces foamed polyethylene film.
By fitting foamed polyethylene as the main insulation there is no need for additional materials.
Additional noise insulation of the structure is attached to the edge band made of foamed polyethylene.
The air cavity between the foamed polyethylene and massive insulation- should not be vented, but it should has a thickness of 20 mm.
To date, there is a choice between a special substrate(professional),cork material or foamed polyethylene.
Used foamed polyethylene with a thickness from 3 mm to 5 mm- one or two layers, depends on when the owner of the villa starts the season or starts using it more often.
If a temperature not lower than 0° C suits us,then it is enough just to put foamed polyethylene with a thickness of 4-8 mm.
The air cavity between the foamed polyethylene and massive insulation- should not be vented, but it should has a thickness of 20 mm.
CELLAIR layer is added to combine protective characteristics of BULPAK with sensitive surface of the foamed polyethylene. .
If the gate on top of the insulation layer andthe skin is pasted with foamed polyethylene with foil coating, this will help to save heat more effectively.
The same approach is applying when it is doing repairmen of apartments- if the walls are very cold,it is enough just to put foamed polyethylene.
Envelopes and dividers of bubble and foamed polyethylene insure protection during storage and transportation of your product.
If in that case the building is not use all the winter, but just time to time,then the thickness of the foamed polyethylene can be reduced.
Moreover, using foamed polyethylene 4 mm plain massive insulation can increase i the thickness of the structure with 80-100 mm, and in that way it will cost a way cheaper.
In category you can find a wide variety of protective packaging andinsulation materials- bubble wrap, foamed polyethylene, thermo reflecting insulation, packaging paper and carton.
If we do not use foamed polyethylene, then we can provide a resistance to heat transfer, by one layer of plastic foam or rock-wool with a thickness of 100-150 mm depends on the exact type of it, but in this case the team insulation is obliged.
According to regulatory requirements for putting a thermal insulation on the walls, it should be used a one-sided foamed polyethylene, with the size 3- 4 mm, combined with massive insulation, for example, rock-wool or plastic foam. .
The foamed polyethylene is a good sound insulator, has thermal insulation properties comparable to those of expanded polystyrene and it is easy to ruse as it is with various thicknesses and it is far more resilient than others thermal insulation materials.
We have a brochure, full of cardboard boxes,bubble wrap, foamed polyethylene, bags, stretch film, corrugated board, paper and many other items, needed for any move to a new home, office or commercial area.