Примери за използване на Hard particles на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Centrifugal filter for hard particles.
Filter for hard particles with permeability 150 microns.
The water passes through a fine web,which separates the hard particles and sand grains.
Hard particles in case of abuse damage the skin and increase irritation.
Ultrasonic homogenizing is very efficient for the reduction of soft and hard particles.
The hard particles can get stuck in the braces and/or to rip them apart from the tooth surface.
Ultrasonic homogenizers are very efficient for the reduction of soft and hard particles.
Scrubs, sodarzhaschie bones and other hard particles can not be used for dry skin- they injure delicate skin.
The design with a decanting elbow provides trouble-free separation of the wine from the precipitated hard particles.
Since the hard particles are partially confined, tremendous forces are released causing the Earth to shake.
These include foods containing small seeds, kernels, andnuts as these small, hard particles can get trapped in the healing wound and cause infection.
Knife sharpening is the process of making a knife or similar tool sharp by grinding against a hard, rough surface, typically a stone, ora soft surface with hard particles, such as sandpaper.
Take a machine andpour inside a liquid or hard particles, which it doesn't distinguish and which it doesn't know how to use.
Clean motor oil is important because if the oil were left unfiltered for a period of time,it could become saturated with tiny, hard particles that can wear surfaces in your engine.
Shooting stars are a phenomenon where hard particles about the size of a grain of rice enter Earth's atmosphere and burn up during descent.
Due to the special chemical structure and micro-aggregation of the polyimide(PI), in the process of friction and wear, especially dry friction, can effectively increase the PTFE transfer film and dual bonding strength,and PI hard particles evenly dispersed in the PTFE matrix, play a supporting role in the load, thereby greatly improving the mechanical strength of the material, friction properties, creep resistance and Vicat softening temperature.
Biomicrogels are safe reagents that are capable of creating elastic films between oil andwater or water and any hard particle.
Ultrasonic milling of harder particles requires sonication under pressure to generate intense cavitation.
Ultrasonic homogenization is efficient in reducing hard and soft particles.
Ultrasonic homogenization is efficient in reducing hard and soft particles.
These scratches likely come from sand and other particles with hard minerals in them, like quartz and topaz.
Helium is a major component of our atmosphere,but its tiny particles are hard to get a grip on.
They tend to clean interdental spaces worse, injure soft tissues and can even damage enamel,especially if a paste with hard abrasive particles is used.
If your cleansing gel works too harshly or contains hard exfoliating particles, your skin will attempt to protect itself with increased sebum secretions, which will only cause your oily skin to become even oilier.
They smash subatomic particles against each other really hard and look at the pieces that are left over.
In addition, normal dust particles are very tiny and hard to spot with the bare eye when looking at the sensor.
Because air is so hard to see, NASA uses aerosol particles to track movements in the atmosphere.
If the compression ratio of the ring die is too large,the pressure of the particles is too hard and the output is low, then the compression ratio of the ring die must be changed.
Polypropylene sedimentary module PP 10 Slim is used for cleaning soft and hard water and removes insoluble particles with a diameter of up to 5 microns, such as sand, rust, and so on.
Such as plant superseding, cut in the release of the plywood gas,the folder of coarse non-metallic particles or hard non-metallic particles, the laminated pressure was once a small hole, the other wall is a small bump, after the stack Will destroy the coating to form a short circuit between the sheets.