Примери за използване на Harmonic distortion на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Total Harmonic Distortion.
A nonlinear modification to the signal can thus be called"harmonic distortion".
Total Harmonic Distortion.
To the extent that an operation on a signal introduces harmonics, it is called harmonic distortion.
Total Harmonic Distortion(SA).
Non-systematic errors would not be a harmonic distortion to the signal.
Total harmonic distortion 0.0003%.
THD: Indicates the relative value of total harmonic distortion of voltage or current.
Total Harmonic Distortion(audio).
In general, power factor should be as close to one as possible and total harmonic distortion should be as low as possible.
Total Harmonic Distortion 0.004%.
Power quality measurements on this system show that the power factor is around 0.35 and the total harmonic distortion is more than 30%.
Total harmonic distortion+ noise 0.04%.
In other words,the error is a harmonic distortion of the signal.
Harmonic distortion of less than 2%;
But if I don't adjust the inverter to minimize harmonic distortion we will get pulsating torque and the whole thing will fry.
Harmonic distortion refers to the replay, the increase in the original signal is not the harmonic components.
The output wave-form is a sine-wave with very low harmonic distortion and clean power like utility supplied electricity.
Low harmonic distortion(less than 2%); and.
Speakers of the performance indicators are rated power, rated impedance,frequency characteristics, harmonic distortion, sensitivity, directivity and so on.
Total harmonic distortion from 250 milliwatts to.
Improvements in drive line-up tolerance to voltage dips/sags and minimized harmonic distortion are possible as a result of the active front-end unit.
Total harmonic distortion better(less) than 10%; and.
Perfect control of harmonic distortion reduces power loss and heat generation.
Harmonic distortion levels are described by the complete harmonic spectrum with magnitudes and phase angles of each individual harmonic component.
Perfect control of harmonic distortion reduces power loss and heat generation.
Controls harmonic distortion to less than 5% and corrects the power factor up to 99%.
The two key aspects of the system that affect the power factor are the harmonic distortion(this is called the distortion factor) and the phase relationship between the AC voltage and current(the cosine of this phase difference is called the displacement factor).
Power factor≥ 0.9, harmonic distortion≤ 20%, EMI in line with global targets, reducing the power supply line power loss and to avoid the high-frequency interference on the power grid pollution;
The concept of total harmonic distortion is a little bit more complicated than that of energy efficiency.