Примери за използване на Heat transfer coefficient на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Heat transfer coefficient(U).
Good thermal insulation- Heat transfer coefficient of 1.5 W/m² K.
Heat transfer coefficient Uw=0.90 W/m K.
This measure significantly improves the heat transfer coefficient.
High heat transfer coefficient.
This value is close to the value of the wall heat transfer coefficient.
Highly heat transfer coefficient.
Mathematically this resistance represents the reciprocal of the heat transfer coefficient.
Heat transfer coefficient- Uf= 1.55 W/ m2K.
In most cases, the film heat transfer coefficient, rust and metal surfaces.
Heat transfer coefficient- up to Uw= 1,00 W/m²K.
Design of large-angle ripples can raise heat transfer coefficient with fairly great reduction of resistance.
Uw- heat transfer coefficient of the window.
The space between the windows is filled with argon or krypton gas,which further reduces the heat transfer coefficient Ug.
Adiabatic, with a heat transfer coefficient of 0.038 Kcal/mh℃.
With its good heat conductivity, it can substitute for stainless steel since its heat transfer coefficient is 3 times of stainless steel.
Overall heat transfer coefficient- below 1.00W/m2K.
It has good high and low-temperature characteristics,non-magnetability and low heat transfer coefficient and thermal expansion coefficient. .
High heat transfer coefficient and high evaporation intensity.
It is important to note that insulating materials are classified in different groups,depending on their thermal conductivity and their heat transfer coefficient.
Uf- heat transfer coefficient of the profile(frame and wing).
Design of small-angle ripples allows for reduction of degradation resistance andis featured by fairly low heat transfer coefficient.
It has a very low heat transfer coefficient(Ug value 1.1 or 1.0 W m² K).
The copper tube expander makes copper tube contact the aluminum sheet and accelerate the turbulent flow,destroy the boundary layer, and enhance the heat transfer coefficient.
Reduced heat transfer coefficient compared to other building materials;
Thanks to the introduction of a special polyurethane foam into the chambers, it is possible to obtain extremely favorable values of the heat transfer coefficient.
U2- heat transfer coefficient considering the panel profile geometry*Calculated acc.
In order to evaluate a construction material, decisive, however,is not the amount of heat that passes through it(the heat transfer coefficient), but the resistance to the heat transfer it has.
Its heat transfer coefficient is low, so I can keep your house warm in winter and cool in summer.
To offset the effect of air side heat transfer coefficient is low, usually light tube wall mounted finned tubes.