Примери за използване на High-pole на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
IP65 Quality waterproof solar high-pole light.
High-pole lamp is used for roads, roads and other places of a lighting.
Light pole installed in the body, High-pole Lamp lifting speed of 3 to 5 meters per minute.
High-pole Lamp When the lamp is raised in place, the lamp panel can be automatically disengaged and locked by the hook.
Light pole is much higher than the street lamp, High-pole Lamp lighting area is also larger.
The lifting of the high-pole lamp panel is achieved by changing the direction of rotation of the motor.
The lamp pole is much taller than the street lamp, High-pole Lamp the illumination area is also bigger.
High-pole lamp is used in highways, roads and other places, High-pole Lamp its handsome in appearance, should have strong decorative.
Manual remote control device lead wire length of 10 meters, High-pole Lamp the operator at 5 meters remote control lamp movements, so as to ensure the safety of the operator's personal.
High-pole lighting: a lighting method of a group of lamps installed on a lamp pole with height equal to or greater than 20m for large area lighting.
Worm gear reducer self-locking ability, compact transmission, a large transmission ratio, in order to reduce the worm gear, worm speed ratio, reduce the rise of torque,especially the addition of a group of pulley, High-pole Lamp so that the speed of the light plate Take-off and landing less than 0.2 m/s.
High-pole Lamp The electrical control system is installed in the lamp rod inside, can avoid the bad outdoor environment to cause the lift movement fault.
When the installation of lamps, if it is LED lamps, then the lamp behind the drive power to zero line, FireWire, as well as ground, in the wiring, the ground must be connected to the pre-arranged main cable, if the drive power to the ground Line is not connected,then encountered thunderstorm days, High-pole Lamp it is likely to be burned.
High-pole Lamp Electric lifting operation is convenient, the lamp plate rises to the work position, can automatically take off the lamp plate, the hook, the wire rope unloading.
The lamp rod is octagonal or 12-angled cone-shaped rod body, by the high-strength high-quality steel plate by shearing, bending, automatic welding forming, general height has 20, 2 5, 3 0, 3 5, 40 meters and several other specifications,the design of the maximum wind resistance can reach 6 0 m/s, High-pole Lamp each specification from 2 to 4 knots.
Functional to the framework of the main structure, High-pole Lamp but also to the main decorative materials to steel, steel-based, light pole, light plate with hot dip zinc treatment.
For the special product type light pole can be stainless steel rod or high quality steel plate, molded into a multi-Ling cone-shaped plug-in steel bar, light box by hot galvanized anti-corrosion treatment, light plate skeleton made of high quality stainless steel,fastener bolt, High-pole Lamp Nuts for stainless steel and so on.
High-pole Lamp The pole body generally is the pyramid single structure, uses the steel plate roll to form, the height is 15-40 meters, many is two to the composition, the irradiation radius may reach the 40-80m.
One of the common 20m, 25m, 30m height of the product in the light pole on the caliber, the lower diameter, light pole section, the upper wall thickness,the next section of the wall thickness is different, High-pole Lamp according to the specific needs of the design, different height needs With different caliber, and in the high pole of the poles are basically hot galvanized with spray treatment.
High-pole Lamp In order to fully ensure that the lamp plate to the limit position when the automatic parking, the light plate rise, the movement of the drop in the performance of reliable limit switch, and has a super stroke protection.
In the requirements of the same lighting effect under the premise of the general use of 150W high pressure pole can replace 400W other lights, power factor can reach 0.99,very energy efficient, High-pole Lamp but also support the repeated hot start, very suitable for road lighting, plant lighting, Workshop lighting, mine lighting, park lighting, high pole lighting, intelligent lighting.
High-pole lamp is generally refers to more than 15 meters of steel cone-shaped light bar and high-power modular light frame composed of a new lighting device, it is the lamp, internal lighting electrical, Rod and foundation part of the combination.
And now have to promote a comprehensive movement, the stadium is to provide sports venues, whether it is day or night can be seen on the stadium on the sea, often see a lot of running at night, play, play the figure, the stadium must have lighting equipment Can,high pole lights is that we often see the lighting on the playground, High-pole Lamp if there is no high pole lights that night can not reflect its value.
If you focus on energy saving and brightness, you can choose the high pole light,the light source is a new energy-efficient lighting source, High-pole Lamp to achieve the same lighting effect of the case, the high pole lights can be more than 70% Saving about 20%.
High pole lights generally refers to more than 15 meters steel conical poles andhigh-power combination of lighthouse constitute a new type of lighting device, High-pole Lamp which consists of the lamp, the internal lighting electrical, rod and the basic part of the combination.
If you focus on energy saving and brightness, you can choose high-pole lighting, the light source is anew energy-saving lighting source, in the case of achieving the same lighting effect, high-pole lamp can save about 70% energy than other high-pole lighting, LED About 20% energy saving.
High-pole Lamp Landscape steel structure steel shall not affect the material and mechanical properties of cracks, delamination, heavy skin, slag and other defects pitting or scratches depth shall not be greater than the thickness of the steel thickness of the negative 1/2, and should not be greater than 0.5mm.
High pole lamp should be used low power loss, stable performance of the annex, a reasonable choice of energy-saving technologies and equipment to ensure that the effect of high pole lighting at the same time, should prevent the lighting industry,light pollution, to limit the light of light pollution to control the main, High-pole Lamp To avoid the phenomenon of first pollution after treatment.
High pole lights are generally composed of two or three steel pipe, in the installation to pay special attention to each two sections plug each other when the insertion depth of not less than 60 cm, if the plug is not in place, do not worry it will Their own down, butwill affect the overall vertical bar lights, High-pole Lamp there will be left and right shaking the situation, if the plug in place, then what will not happen.
High pole lighting is a relatively special lighting in urban lighting equipment, its safety and technical parameters require more,must have a detailed technical conditions that the installation of high pole lights should also be in strict accordance with the manufacturers to provide Operation instructions, High-pole Lamp the daily operation and maintenance should be carried out in a timely manner to ensure that high-pole lighting facilities can be safe and normal operation.