Примери за използване на Hydroxide solution на Английски и техните преводи на Български
{-}
-
Medicine
-
Colloquial
-
Official
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Resistance to 25% sodium hydroxide solution.
Sodium hydroxide solution, about 0,1 mol/l.
Boron(B) value of the sodium hydroxide solution(4.4).
Sodium hydroxide solution: approximately 2 mol/l.
Carbon dioxide formed is absorbed in a barium hydroxide solution.
Mannitol Sodium hydroxide solution 2%(for pH adjustment).
Allow to cool andback titrate with the sodium hydroxide solution(3.6).
Add 20 millilitres of sodium hydroxide solution(4.2) and 20 millilitres of water.
These include the following: meglumine, sodium chloride, glycofurfural, glycine, poloxamer,sodium hydroxide solution and water.
Bluing it is applied in a sodium hydroxide solution at the temperature approx. 140°C;
The drug contains olopatadin, as well as sodium chloride, water, disodium phosphate dodecahydrate, benzalkonium chloride,sodium hydroxide solution, as well as hydrochloric acid.
Hydrochloric acid and/ or sodium hydroxide solution may be added to adjust pH.
Any used vials, syringes, and spillage etc. should be autoclaved andany residual Xeomin inactivated using diluted sodium hydroxide solution(0.1 N NaOH).
The operation is satisfactory when the barium hydroxide solution in the absorber F2 remains clear.
The soluble alkali hydroxide solution, Chrysin slightly soluble in ether, ethanol, and chloroform, insoluble in water.
Hydrochloric acid solution and/or sodium hydroxide solution(for pH adjustment).
Gradually add ammonia hydroxide solution(4.4) until the solution becomes blue, then add 1 ml in excess.
Hydrochloric acid solution and/ or sodium hydroxide solution(as appropriate).
When the process is finished, separate the Erlenmeyer from the apparatus, rinse the end of the intake tube and the Erlenmeyer walls with a little distilled water, andtitrate the excess acid against a standard 0,1 mol/l sodium hydroxide solution(4.17).
And water for injections, sodium hydroxide solution and hydrochloric acid solution. .
Distil the ammonia according to the processdescribed in Method 2.1, taking care to add to the distillation flask sufficient sodium hydroxide solution(4.12) to ensure a large excess.
Neutralise with 2 mol/l sodium hydroxide solution(4.8) and acidify again with a drop of hydrochloric acid(4.1).
Mannitol Disodium edetate Sodium citrate Citric acid monohydrate Water for injections Sodium hydroxide solution Hydrochloric acid solution. .
To precipitate phosphates, add a suitable quantity of saturated barium hydroxide solution(4.18) until further addition does not cause the production of more precipitate.
Any used vials, syringes, and spillage etc. should be sterilised under high pressure andany residual Xeomin inactivated using diluted sodium hydroxide solution(0.1 N NaOH).
To precipitate the phosphates add some saturated barium hydroxide solution(4.21) until no further precipitation occurs.
The other ingredients are glycerol 85%, sodium acetate trihydrate, methionine, metacresol, hydrochloric acid(for pH adjustment),sodium hydroxide solution(for pH adjustment) and water for injections.
Excipients: glycerol 85%, sodium acetate trihydrate, methionine, metacresol(see leaflet for further information),hydrochloric acid and sodium hydroxide solution(for pH adjustment), water for injections.