Примери за използване на Motors are used на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Electric motors are used by most of the power tools.
In modern electric cars, brushless electric motors are used.
Single phase motors are used for various household appliances.
For the feedback built-in encoders in motors are used.
Single-phase induction motors are used extensively for smaller loads.
It introduces generators and motors, and discusses how ac and dc generators and motors are used.
The letters D or(…- 3) for three-phase motors are used in the device designation or E or(…- 1).
IE4 motors are used for the SM 13/16 models, whilst the SM 10 is equipped with an IE3 motor. .
For applications where variable speeds are necessary, typically an AC motor with an Inverter or brush motors are used.
The majority of three-phase motors are used inindustry, but sometimes you have to work and at home with them.
The European Commission identified electric motors as the most significant electric load in industries where motors are used in production processes.
In network screwdrivers, powerful AC motors are used, and instead of a pulse-width regulator, a triac is used.
Our motors are used in a wide range of applications such as industrial, agricultural, textile, small instrumentation, automation, dishwashers, stage lights, etc.
While previous XY motion systems rely on a rack and pinion design, the higher speeds andaccelerations mean Bosch Rexroth linear motors are used in the new platform.
Outboard motors are used most commonly for boats and are developed as a self-contained unit with an engine.
The very largest electric motors are used for propulsion of ships, pipeline compressors, and water pumps with ratings in the millions of watts.
Such motors are used in devices, such as food mixers and power tools, that are used only intermittently, and often have high starting-torque demands.
Brush DC and AC motors are used sometimes with limit switches when the accuracy of positioning is not that crucial.
The very largest electric motors are used for propulsion of large ships, and for such purposes as pipeline compressors, with ratings in the millions of watts.
The very largest electric motors are used forpropulsion of large ships, and for such purposes as pipelinecompressors, with ratings in the thousands of kilowatts.
Two electric motors are used in the hybrid system- one to support the petrol engine in driving the wheels and another to enable regenerative charging to the 1.4 kWh lithium-ion battery, located behind the rear seats.
Four speed motors are used for cover, bottle clip, transmit, capping, machine high degree of automation, stability, easy to adjust, or replace the bottle cap when not spare parts, just make adjustments to complete.
Front electric motors are used for dynamic torque distribution and to improve the acceleration characteristics of the machine, rear(located between the engine and transmission) supports the acceleration, braking and shifting.
Energy savings quickly add up when high-efficiency motors are used in combination with variable-speed drives- devices that adapt their speed to the task at hand- because the energy used to run a motor over its lifetime costs 100 times more than the motor itself.
Energy savings quickly add up when high-efficiency motors are used in combination with devices that adapt their speed to the task at hand- known as variable-speed drives- because the energy used to run a motor over its lifetime costs 100 times more than the motor itself.
Besides the army, the motors were used in many American police departments.
Q: What industries are your DC motor being used?
Often, a third motor is used.
Another large motor is used to shoot.
Originally this motor was used for light airplanes.