Примери за използване на Naoh на Английски и техните преводи на Български
{-}
-
Medicine
-
Colloquial
-
Official
-
Ecclesiastic
-
Ecclesiastic
-
Computer
NaOH during hydrolysis.
The molar mass of NaOH is.
NaOH& Chlorine production.
A high concentration of NaOH.
I think NaOH become blue and that HCl becomes orange.
The concentration of NaOH problem?
I think NaOH become blue and that HCI becomes orange.
Solubility soluble in alcohol,pyridine, NaOH.
Sodium hydroxide(NaOH)(for pH adjustment) Water for injections.
Resistant to concentrated solutions of NaOH up to 18 oBe;
Sodium hydroxide(NaOH) is another prototypical strong base.
Adjust pH with either HCl or NaOH if necessary.
Add some NaOH to the solution to keep its pH around 10.
Excipients: fructose, mannitol, polysorbate 80,tartaric acid, NaOH and/or HCl.
The result is a very pure NaOH, because it contains no impurities.
NaOH, which is hydroxide(OH-) and sodium(Na), is called sodium hydroxide.
Caustic soda(formula NaOH) caustic, corrosive, 2nd class of danger.
These experiments do not use orgenerate any hazardous reagent, except for HCl or NaOH.
Use bases such as:NaOH, KOH, and ammonia(recommend customer to adjust).
After filling of the digesters, the chips are flooded with boiling liquor containing mainly NaOH and Na2S.
Water for injection,NaCl KCl CaC12 2H2O NaOH Sodium lactate N-acetyl-l cysteine.
NaOH, H2SO4, and phase transfer catalysts(PTC), which cause impurities in the synthesized fullerenol.
Disodium edetate, polysorbate 80,lactose anhydrous, NaOH and/ or HCl diluted(for pH adjustment).
Solutions of NaOH, H2O2 and H2SO4 can be used for alkalization to obtain cellulose nanofibers in a short processing time.
Experiment with lye is a blend of industrial pure NaOH and industrial pure NaNO2 supersaturated solution.
The pH should be 5,5± 0,2(adjust by addition of a minimised volume of NaOH solution or HCl).
Alkali ratio of 700g/ L or NaOH+ 250 g/ L sodium nitrite, the boiling temperature of about 160 DEG C.
Excipients: fructose, mannitol, polysorbate 80,tartaric acid and NaOH and/ or HCl for pH adjustment.
Distil the ammonia according to Method 2.1, variant a, adding sufficient NaOH solution(4.7) to ensure the presence of a considerable excess.
For multiple backwashing, when the filtration effect is not obvious, use 5% or less hydrochloric acid solution, or 8% or less sulfuric acid solution, or10% or less NaOH solution at room temperature, then rinse with water.