Примери за използване на Polytron на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Polytron HD background pictures: Free download 1.
Lower fuel andoil consumption(based on records prior to using Polytron).
POLYTRON coats the metal in your engine with a protective layer.
The effect of these two problems is drastically reduced in the presence of Polytron.
POLYTRON MTC can be used with benefits wherever friction is found.
Additional heat needs additional lubrication and POLYTRON can deliver that to you.
POLYTRON can be added with the coolant gas on the low-pressure side.
Change the oil andadd to the new oil 10% of Polytron MTC(or use Polytron motor oil).
Therefore, POLYTRON is performing an additional“service” to your turbo charger.
After 500 to 600 miles change the oil andoil filter again and add 10% Polytron MTC(or use Polytron motor oil).
Polytron goes directly to the wear points or hot spots so that protection is supplied where it is needed most.
The fuel should also be treated with POLYTRON Fuel Concentrate at a ratio of 1 ml/Liter of fuel.
POLYTRON oil products use advanced molecular engineering to create a completely new class of lubricant enhancers.
After the cleanup stage referenced above, replace the dirty oil with clean oil(same make of oil that was used before) andadd 10% Polytron MTC by volume.
Polytron petroleum products using advanced molecular engineering to create an entirely new class of lubricant enhancers.
It will prevent the oil from losing it's lubrication ability andthe additional lubricity caused by POLYTRON will help stabilize the engine oil mixture.
Polytron will be there to help your bottom line with products that are at the cutting edge of environmentally responsible technology.
How can used oil analysis can help you see the difference in performance between lubricants that contain Polytron MTC additive package and those which do not?
Polytron dissolves the build-up and varnish and cleans the engine parts including the piston rings, releasing them to operate properly.
In order to use our product in two stroke engines you must mix POLYTRON MTC with the oil you will be using either before you mix the oil and fuel or by adding it to the oil reservoir.
POLYTRON is actually attracted to areas of friction and heat that may be caused where your oil is breaking down and can no longer provide effective lubrication.
Given that oil companies manufacture oil additive packages that only meet the minimum requirements, if you want to protect the second largest investment of your lifetime, namely your automobile,you need to put POLYTRON in your vehicle.
Caution: POLYTRON MTC is not intended for gears that have sheared or on the verge of lock-up, unless it is due to overheating and has not yet resulted in welding.
When added to grease, motor andtransmission oils, Polytron additive packages dramatically reduce wear of the mating friction surfaces in car engines, transmissions, and other equipment(up to 95%), considerably extending their life span.
POLYTRON MTC(Metal Treatment Concentrate) is a uniquely blended petroleum based formula that is compatible with all motor oils, gear oils and other lubricants.
By reducing friction, Polytron improves the efficiency of your equipment; allow more complete fuel combustion thereby releasing more energy, while reducing harmful emissions.
Polytron MTC penetrates the metal structure at its friction surface and converts a very thin layer of original metal into a much harder metal that wears out 4- 7 times slower.
Since the build-up contains wear metal,when Polytron MTC is used for the first time, oil analysis most likely shows sharp increase in concentration of wear metals, which may be wrongly interpreted as excessive wear due to use of Polytron MTC.
Polytron owns the exclusive rights to a proprietary and revolutionary‘Next Generation' lubrication technology that can significantly reduce harmful exhaust pollutants while increasing fuel efficiency and overall performance.