Примери за използване на Pressing force на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Pressing force should be small.
Support for graphic tablets with control of the pressing force.
Adjustable press pressure for controlling cap pressing force.
When a line is drawn, the pressing force should be the same along the entire length; this is very important to consider.
Speed is controlled from 0 to maximum by pressing force of on/off switch.
During the massage it is important to not only the direction of movement, butalso the duration and the pressing force.
The start button is designed so that a change in its pressing force leads to a change in the signal to the power regulator transistor.
Now push your tongue against your hard palate,gradually increasing the pressing force.
Different kind of balers with pressing force from 1,5 to 50 tons, producing bales with 50 to 650 kg weight, as well balers for direct press into containers or bags.
Now, push the tongue against the hard palate andstart to gradually increase the pressing force.
The appearance of each letter(written in bold or subtle) to say for itself, butparticularly good pressing force is visible, if you turn the paper and look at it from the back side.
YH produce the heavy duty hydraulic hose crimping machine up to 800mm diameter hose with 2500 ton pressing force.
Features: large pressing force, high yield of juice,press the piston rod of the lifting speed, the pressing force is adjustable, saturated press time is controllable.
When sharpening, it is recommended to make a tool with approximately the same number of movements andobserve the same pressing force.
Try not to squeeze a lock of hair very strongly and not to change pressing force, your movements will have to smooth and in them there shouldn't be stops(there on a lock will be the hall which will spoil all effect of naturalness).
The punch is equipped with auto Hydraulic overload protection device, andguarantees consistent pressing force for quality products.
After applying a certain amount to the glued places, the product should begin to dry a little- so it will be possible to protect it from leakage andgetting into unnecessary niches with a slight pressing force.
The end result is a reduction in aerodynamic drag coefficient at 0.43 and distribution of the pressing force to front and rear axle of 47% front and 53% rear.
In the design of integrated electrical components, micro switch are widely used in household appliances and military products due to their advantages of small contact distance, short action stroke,small pressing force and quick switching on and off.
If, when performing an indirect massage of the heart, an impulse appears on the carotid artery,similar to a pulse, then the pressing force is sufficient to allow blood to flow to the brain.
Next you need to take a wooden rod 6 mm in diameter, put it under the cutting line andapply a quick and sharp pressing force on both sides.
The application includes a set of raster and vector tools, allows you to work with the area in the approximation mode,adjust the pressing force, can interact with the imported files in bmp and jpg format.
Materials and key structures have undergone extensive user tests to find a perfect balance between pressing force and key response.
OEM service: YH customized heavy duty hydraulic hose crimping machine up to 1000mm hose pipe or tube and5000 ton pressing force available upon request.
Accordingly, the slider is lowered and its TDC/BDC are monitored by a FANUC DiS torque motor and its encoder,actuating a ball screw with a 3 tonne pressing force in a controlled manner.
The punch press force: If you do not know the press force required for your material.
It's constituted by 10HP(7.5KW) motor, 125mm ram,25 tons press force, and the capacity is 1.5 tons per hour.
Automatic Horizontal Baling Press TB-1011 sereis is constituted by dual motors(from 40~75HP),100 tons press force(140 Tons also available).
The force of pressing should gradually increase.