Примери за използване на Protective conductor на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
NYY-J- with protective conductor.
TN-S system: in which throughout the system, a separate protective conductor is used;
NYM-J- with protective conductor.
At the same time, if it has branches to single-phase equipment,then it should have a protective conductor.
NYM-O- without protective conductor.
Neutral protective conductor(grounding)- yellow and green stripes along the entire length of the wire;
NYY-O- without protective conductor.
The following letter N is determined for a functional method in which arranged the neutral and the protective conductor.
Impedance of"phase- protective conductor".
In this system, road access to the risers suitable 3-phase L, and divided N(work zero)and PE(protective conductor).
After the RCD, the neutral and the protective conductor must not be connected anywhere between themselves.
Low-voltage electrical installations- Part 5-54: Selection anderection of electrical equipment- Earthing arrangements and protective conductors.
If there is a C- means a function of the zero workers and protective conductors are provided with a common conductor(PEN).
Protective conductor: Red or green-yellow striped: The protective conductor is safety cable against electric shock.
Impedance Zs of the loop"phase- protective conductor";
With the use of a DIN rail ground(protective conductor) terminal block, the DIN Rail itself can be used as the Grounding Terminal Block.
Protection class I: Devices WITH protective conductor.
Electrical safety- contour impedance“phase- protective conductor”, resistance grounding and lightning systems, insulation resistance of power cables and faulty electric protection.
The case is fitted with an overpressure disconnector and an M12 mounting stud,which is also used for the protective conductor connection.
Here they are installed separately, and the protective conductor PE connects directly all conductive parts of the installation.
The intelligent BS-B10 also detects faulty wiring of the infrastructure-side socket and, in addition,controls the incoming protective conductor before charging begins.
The cables designed for wet premises have a protective conductor- screen of copper braid for protection against electric shock.
The intelligent BS-PCD019 also detects faulty wiring of the infrastructure-side socket and, in addition,controls the incoming protective conductor before charging begins.
It is important not to confuse the place where the protective conductor is connected, the phase with the zero can be connected to any power contacts of the outlet.
For proper functioning of the earth leakage protection, the neutral conductor(N) and the protective conductor(PE) must be separate conductors, ie.
Depending on the connection method andthe number of zero protective conductor and workers can be divided into the following electrical grounding system.
Zero vein(blue color)is placed on the zero block, protective conductor(yellow-green)- on the protective pad, or else on the welded shield bolt.
Thus, in new houses, as a rule,modern system TN-C-S(has a zero as a working or protective conductors, which are normally connected to the main board of the building, they are all hereinafter separated).
To reduce the measurement error,protection technology should be adopted to install protective conductor on the line with large leakage current to basically eliminate the influence of stray current on the test result.
In order to reduce the measurement error,a protection technology should be used to install a protective conductor on the line with large leakage current to substantially eliminate the influence of stray current on the test result;