Примери за използване на Relay outputs на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Relay outputs(5A).
LON module with 4 relay outputs.
Relay outputs for fire condition.
Two programmable relay outputs.
Four relay outputs for fans, pump and auger.
Two independent relay outputs.
A/250V SPDT relay outputs for pump engines control.
Up to 2 SPDT relay outputs for PID control or signalization.
LON module with 4 digital inputs and 4 relay outputs.
Optional up to 24 relay outputs and 12 hybrid outputs. .
Two-channel receiver for reader BE. PROXY with two relay outputs.
They have 4 relay outputs with changeover contact- 230VAC/2A.
Module 40 optoisolated inputs and 24 relay outputs.
Two independent relay outputs for alarm signals from the PIR sensor and from the glass breaker.
LON I/O module with 4 digital inputs, 2 relay outputs and 2 digital outputs. .
The system is modular so you can add up to 320 doors,640 inputs and 640 relay outputs.
Fully programmable LON module with 8 relay outputs with normally opened contacts.
LON I/O module with 1 isolated analog input,6 isolated polarity insensitive digital inputs and 6 relay outputs.
Contains 82 LEDs connected to IDC-50 sockets(relay outputs) to visualize output states.
DESCRIPTION FA3-612M is a unit(actuator) designed to control fan coil units using analogue/ digital inputs and analog/ relay outputs.
The L403's I/O architecture is focused on a large number of relay outputs while retaining the basic digital I/O capability.
Triple channel- 3 relay outputs and temperature control in the range from -55° C to +125° C, operating with a DS18B20 sensor probe(not supplied).
LON three point module with 6 digital inputs,2 two-stage relay outputs and 2 digital outputs. .
The differential thermostat has relay outputs, which power the circulation pump(three-way valve) and the electrical boiler heater.
The VCL X24 D02 Inverter relay adapter has been designed to be integrated within the PX24 telemetric station, and it allows for the DO 1 andDO 2 transistor outputs of the telemetric station to be applied in switching two relay outputs.
This model has 24 SPDT relay outputs and is perfectly suited for applications with high concentration of control tasks.
Module for analogue output as per the standard 4- 20 mA signal,which has three relay outputs, triggered when three separate alarm levels are increased.
LED display for PV and SV,2 SPDT relay outputs for PID control and/or alarm, 2 isolated current outputs for control or proportional to the input value(not powered); wall mountable, IP65.
Each module has 10 inputs for Pt1000 temperature type orindependent contacts thermostat and 10 relay outputs for each temperature point and one output for a command to the central source.