Примери за използване на Safety factor на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
S= safety factor.
With high safety factor.
Safety Factor 300% of SWL.
K is the safety factor.
Safety Factor 5:1 when used with bobbin.
Designed with a safety factor 4:1;
High safety factor resisting 17 level winds.
Large working load and high safety factor.
High safety factor.
Easy to disinfection,improve the safety factor.
High safety factor.
Can be loaded from all directions, safety factor: 4times;
High safety factor.
The windward area is smaller and the safety factor is higher.
KZ- the safety factor(20%- in this case).
Features: Low extension; Safety factor 7:1.
The bearing safety factor is large and the use is safe and reliable.
It offers a significantly higher safety factor than Rilsamid® PA12.
An added comfort for infant andparents without neglecting the safety factor.
The bobbin ensures this minimum safety factor is met by spreading the load across the pin.
However, modern threads do not have the same high safety factor as cotton.
High safety factor: The required voltage and current are small, the heat is small, and there is no safety hazard.
It has the characteristics of low power consumption,high safety factor and illumination.
LED waterproof power supply,high safety factor, constant current output, lamp life of 50,000 hours;
Because the arc steel frame has no edges and corners, it will not cause any harm to pedestrians, andhas higher safety factor.
Head adopted advanced mechanical principle,increasing safety factor and stablizing accuracy between the holes distance.
In fact, you can confine yourself to harmless and painless home treatment,if hoarseness is a consequence of a cry or other safety factor.
It can be used in aviation, aerospace,military and other safety factor of high requirement to prevent the bolt loosening.
We consider all of those usage scenarios, and will multiply them out even further to create an even greater,more conservative safety factor.
Know that the safety factor will be reduced, typically to that of a standard load pin which gives a ratio of only 3:1 rather than the usual 5:1.