Примери за използване на Steel rods на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Reinforced by steel rods.
It is made of steel rods with a ribbed or smooth surface.
Concrete must be reinforced with steel rods.
Steel rods, seashells, pottery, glass, old boots, corncobs.
FTTH drop cable,reinforced by steel rods, 2 Fi….
All brand stainless steel rods are of the highest quality workmanship.
Next: FTTH drop cable,reinforced by steel rods, 1 Fiber.
Installation fittings- steel rods, captured by the clamp circuit with a cross section not less than 12 cm.
Next: FTTH drop cable reinforced by steel rods, 4 Fibers.
A small part of the steel rods with a grid should be punched into the old foundation and tied with reinforcement.
Used for bending rebar,steel bar, steel rods etc.
In the prepared holes hammered steel rods 10-15 cm long, the ends of which clench.
Next: FTTH drop cable with steel wire and steel rods, 1 Fiber.
Some steel rods are also required to be rolled according to the standard or the requirements of the purchaser.
Previous: FTTH drop cable with steel wire and steel rods, 4 Fibers.
Avoid the situation can be using steel rods- to bend them at the right angles can be without much effort.
Then, in the hearth of the fireplace is installed grate made of steel rods.
If in the extracted sample has more than three steel rods/ from valve/ she is deemed unfit.
Our Butterfly FTTH cables have 4 as maximum capacity of fibers,reinforced by FRP or steel rods.
It is typically reinforced by conventional steel rods, steel mesh, or fibers.
Our Self-supporting FTTH cables have 4 as maximum capacity of fibers,reinforced by FRP or steel rods.
For steel rods subjected to fluid pressure, hydraulic tests are carried out to check the pressure resistance and quality.
Inside such devices there are two stepper motors and good steel rods of hardened steel. .
The extendable stainless steel rods make this selfie stick quite lightweight, achieving a maximum height of about 32-inches.
Digs a trench depth of 3m and 0.8m, andtrying to drive at its ends, steel rods(not completely).
Production process: stainless steel rods can be divided into hot rolling, forging and cold drawing according to the production process.
For example, wood, marble, granite or tile for the dial andbrass or stainless steel rods can also be used as base materials.
Stainless steel bars:302 stainless steel rods are widely used in aerospace, auto parts, hardware tools, chemical.
The size(diameter, edge length, thickness or side distance) is not less than250mm hot rolled and forged stainless steel rods.
Stainless steel strips:302 stainless steel rods are widely used in auto parts, aviation, aerospace hardware tools, chemical.