Примери за използване на The magnetic flux на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Here F is the magnetic flux.
It provides a low reluctance path to the magnetic flux.
What is the magnetic flux through the coil?
They provide a path for the magnetic flux.
Find the magnetic flux through the area A.
It provides an easy path for the magnetic flux.
(a) What's the magnetic flux through the loop?
It provides a controlled path for the magnetic flux.
In SI, the magnetic flux measured in Weber(Wb).
Change of the magnetic flux linking that coil.
Electricity is collected by mechanical control of the magnetic flux in the core.
The magnetic flux linking all turns of the solenoid is.
Since the divergence of the magnetic flux density is always zero.
The magnetic flux switches direction and also reaches its peak in the opposite direction.
It makes no difference whether the magnetic flux is increasing or decreasing.
Another disadvantage was that the output voltage was very low,due to the single current path through the magnetic flux.
They spread out the magnetic flux over the armature periphery more uniformly.
When a superconductor is cooled below the critical temperature, the magnetic flux is expelled.
At currents below the circuit breaker rating, the magnetic flux in the solenoid is insufficient to attract the core towards the pole piece due to the spring pressure.
Where∇ with the dot denotes divergence, and B is the magnetic flux density, the first integral is over a surface with oriented surface element.
Most of the magnetic flux arising in the device(or more precisely, it arises in the mains winding) cannot be connected(even inductively) with the secondary winding.
Gauss law in magnetism states that the magnetic flux through any closed surface is zero.
Many transformers have separate coils, as shown in figure 3, and contain many turns of wire and a magnetic core,which forms a path for and concentrates the magnetic flux.
In practice, this means that an electricalcurrent will flow in any closed conductor, when the magnetic flux through a surface bounded by the conductor changes.
These harvesters generally work by changing the magnetic flux through a coil, either by moving a magnet relative to the coil or by changing the flux polarity.
But when the small coilis moved in or out of the large coil(B), the magnetic flux through the large coil changes, inducing a current which is detected by the galvanometer(G).