Примери за използване на To be drilled на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
You're so ready to be drilled!
I want this to be drilled into your head before we go any further.
The box will have to be drilled open.
If one well to be drilled pile manually, it would take many hours of hard work.
Fewer holes need to be drilled.
It is for her to be drilled holes, and only then through them screwing screws into the wooden floor boards.
Dr. Ethan Gross,ready to be drilled.
One tooth had to be drilled down almost to the root.
A nymph in a ebony sundress wants to be drilled!
Do you want to be drilled by Manny?
Please first drip a little water on the place to be drilled.
Allowing large holes to be drilled without machine overload.
Your fiancee is in the front row desperate to be drilled.
So, there are no holes to be drilled on the PCB, except for the four mounting holes.
There needs to be training, and it has to be drilled in daily.
The depth of the holes to be drilled using the guide hole depends on the height of the cut structure.
These pieces are new and needed to be drilled and fitted.
The seabed would be too deep to be drilled through for a rock tunnel or for a suspension bridge's foundations to be laid.
With variable speed drills there is no need to centre punch the point to be drilled.
There are any holes that need to be drilled. And for the Wall.
In the 4th minute of stoppage time and Christian Noboa tested Argentine guard with a distant free kick, butagain he was not allowed to be drilled.
Punch with pobeditovye crown(crown if not,it will have to be drilled along the contour of a drill or a drill).
The largest holes need to be drilled at low speeds, and high speed is used to make holes of small and medium size.
Make an indentation using a centre punch at the centre of the hole to be drilled in order to improve accuracy.
When using a septic tank in the clay soil need to be drilled in the lower concrete ring hole to dissipate the water.
Virtually all construction projects andmajor repairs need to be drilled in stone walls and create assembly recesses in concrete floors.
The bar is placed against the wall close to the hole to be drilled, and the edge of the drill touches it, which ensures smooth operation.
In addition, as productivity of shale gas wells is generally lower than conventional wells, more wells need to be drilled.