Примери за използване на Two conductors на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Two conductors on the outgoing contacts.
It requires only two conductors.
Two conductors carry equal but opposite charges.
Forces are shared by only two conductors.
You just need two conductors with an insulator between them.
The electrical clearance is the shortest distance between two conductors along the air.
They usually consist of two conductors separated by an insulating material.
Differential-mode coupling: noise appears out of phase(in opposite directions) on two conductors.
To identify which of the two conductors is causing the fault.
It refers to a series of thin organic material films placed between two conductors in each LED.
The capacitor usually consists of two conductors separated by an insulating substance.
Short circuits can occur between neutral conductors and ground and between two conductors in the same phase.
The coaxial cable's two conductors are separated by a nonconductive or dielectric material.
It is possible for short circuits toarise between neutral and earth conductors, and between two conductors of the same phase.
Welding two conductors of different materials or semiconductors A and B to form a closed circuit.
The phase conductor goes into the first two-way switch together with two conductors connecting it to the second two-way switch.
Schematically the cross-switch is placed between the two two-way switches, andits function is to„reverse” the two conductors.
In the absence of a soldering iron, electrical contact between the two conductors can be restored by means of a special composition.
The device, which consists of two conductors fastened to the head by a rubber strap, significantly boosted results in a simple arithmetic test.
They consist of separate sections, each of which, in turn,is represented by a shielded cable(with one or two conductors) in two-layer insulation.
The essence of the screw method is that two conductors are installed in the brass tube, which are then clamped each with its own screw.
The value of this potential difference is related to the temperature of the measurement point of the non-heating part andis related to the material of the two conductors.
These birds die most often due to electrocution by touching two conductors or a conductor and an earthed part of the facility.
After switching, the two conductors will continue to work according to their purpose(input and one output), and the third core will be powered by a zero outlet.
This is achieved by ensuring the proper area of contact between the two conductors, as well as due to the maximum possible contact between them.
When two conductors at different potentials are close to one another, they are affected by each other's electric field and store opposite electric charges like a capacitor.
Place the positive andnegative probes of the Megger on the two conductors or terminals between which you are testing the insulation resistance.
Conducted noise is also characterised by the way it appears on different conductors: Common-mode or common-impedance coupling:noise appears in phase(in the same direction) on two conductors.
A potential difference(voltage) between the two conductors causes the generation of static electric field, which is divided by the dielectric into positive and negative charges.
Depending on the place where the measurements are done, voltmeters are divided into stationary, mounted in panels or portable,for measuring the potential difference between two conductors during the work of electricians or in laboratory conditions.