Примери за използване на Two pins на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Two pins.
You hit two pins!
I make two pins at the same time, to save time.
All you need is two pins.
You need two pins, I will get two pins.
He went 5-2 during the tournament,including two pins.
Two pins, both legs, and they won't give me any more morphine.
The conduction is good because there are two pins in one line;
We only needed two pins to win, and you left them both standing.
At the end of the bundle of wires, place two pins acting as a base.
And 2 the keys had two pins each to prevent them from rotating.
To do this, first place the rubber around the top two pins next to the blade.
The TS has only two pins one of which carries the signal and the other one carries the shield or ground.
А buttonhole with a seasonal blooms and green accent, wrapped,comes with two pins.
GU5.3 is a socket with two pins, used for reflector lamps.
If it works as transfer switch, the middle one is moving contact,and the other two pins are fixed contact.
The third row is to lay two pins, which need to be put on the fender.
If it serves to signal contact,the power can connect with middle pin and either one of the other two pins.
American contact type A with two pins to European contact C type with two pins.
Douglas stuck a pin in everywhere he fancied going, I stuck a pin in where all the endangered animals were, and we made a journey out of every place that had two pins.".
We remove the starter andagain supply power to two pins at both sides of the LED tube.
Sometimes, it seems like you can knock two pins standing on opposite sides, but accurate shot one by one and it's easy to bounce, urging the other, and that the audience applause and contented smile player.
To mark the position of folds,kill the pin 15 cm from the side seam, and two pins at intervals of 15 cm from the first and from each other.
Yeast is bedded in framing on two pins that enable its inclination by 130° in both directions.
It is also very important tolook well on sideburns, as in the“diagonal” inside of the diode LED combining the two pins to mount the circuit, already that if you mount it backwards will not turn on.
I2C LCD Display I2C LCD is designed for alphanumeric LCD display,using only two pins of the microcontroller and not interfere with the hardware UART pins for serial communication.
Today we would like to discuss the difference of two pins rocker switches and three pins rocker switches.
As we can see in the following comparative picture of the two reviews,the second revision of the PI has two pins +5V, five of GROUND(grounding), two of +3,3V, eight pins General purpose GPIO, five SP10, two UART, and two pins I2C1.
Comments: Two pin bars at the top- signal for possible correction.
Two pin bars at level of resistance- negative signal.