Примери за използване на Vertical racks на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
S- the number of vertical racks.
Vertical racks(pillars) are being built.
S- the number of vertical racks.
Vertical racks will help form the frame.
Preparing the site for the installation of vertical racks.
The use of vertical racks will also help to optimize space.
It is necessary to start with the installation of vertical racks.
For its installation install vertical racks, based on the ground.
Vertical racks, as well as the lower support, are made of profiled pipes.
Proceeding from this, the height of the vertical racks is 2.5 m.
For the installation of vertical racks, it is necessary to prepare the base.
Vertical racks are connected to each other by profile mowing on the bottom, top and middle.
For this, you can use the same bolts as for attaching vertical racks to horizontal supports.
In this case, vertical racks are installed at the stage of foundation pouring.
To increase the strength of concrete rings,made use of an annular valve diameter up to 8 mm and vertical racks.
In vertical racks, after every 15 cm, two-millimeter holes are drilled and burned matches are inserted.
Structurally the trellis in the form of a house has 4-6 supports(4 corner and 2 central),for which the pipes of vertical racks- pipes¾"are selected.
This is necessary in order not to disturb the vertical racks of the frame and prevent damage and deformation of the profile sheets.
Then we select along the length of the transverse edges of the tubes½"and fix them on the top of the central vertical racks.
We place vertical racks from the profile pipe of a certain ø into the drilled hole and pour the installation with a mixture of sand and rubble.
The pillars on which rests the roof,you need to wrap a thick rope, vertical racks decorate anchors, and instead hang buckets beer keg.
To make the sides of the pool more rigid, special inserts are used from plastic sheets, which are installed in the pockets intended for this andare connected with each other by vertical racks of the structure.
For this, as well as for fixing the stop during its movement along the vertical racks, two through holes are drilled in a block of steel strips.
The distance between the columns must first be measured with the dimensions of the thermal insulation material and the cladding, and at the same time take into account that the openings for future windows anddoors should also not fall on vertical racks.
For this, as well as for fixing the stop during its movement along the vertical racks, two through holes are drilled in a block of steel strips.
Vertical rack for gym mattresses, 4 wheels for transportation,….
At the expense of it the vertical rack of the drill with the handle which allows to manage a hole to a hole becomes stronger.
This allows you to strengthen the vertical rack of the drill with a handle that allows you to control the tool.
Such a piece of furniture usually has open shelves,can be attached to walls or ceiling on a vertical rack in the upper, lower tier or the entire height of the wall.
Remove unnecessary things.Use narrow racks, vertical cabinets.