Примери коришћења Gypsum board на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
Next: Normal gypsum board.
Design of gypsum board ceilings: 10 interesting ideas.
For these purposes it is desirable to use gypsum boards.
Cut out the right size strip of gypsum board and rolled with a needle roller.
This effectively impedes the transfer of heat through the gypsum board.
After completing work on the gypsum boards are pieces of trim.
With gypsum boards are ideal surfaces that do not require additional alignment. With.
Markup is applied depending on the size of gypsum boards used.
Step 4: Now break the gypsum board into small pieces- the DIY tesserae are ready.
This requires that small incisions, cutting board, butonly one side of gypsum board.
In order to cut a gypsum board, it is necessary to use a construction sharp knife.
At the same time, a metal skeleton is first arranged,which is then closed with sheets of gypsum board.
Now becoming increasingly popular GVL- gypsum boards with wood fiber as filler.
Lightweight gypsum board allows their use in old houses, without creating unnecessary burdens on the floor.
Using with joint compound to reinforce gypsum board joints, repairing drywall, etc.
Gypsum boards there is no smell, they are not electrically conductive, absorb excess moisture and release it during the dry air in the room, able to"breathe".
This method allows you to make gypsum board lattice, so the sheet will bend easier.
Once formed internal insulation house wall surface closes OSB plates, gypsum board or plywood sheets.
In this case, we have a gypsum boards, which are attached directly to the base ceiling and wall profile.
It is designed for use with joint compound to reinforce gypsum board joints, repair drywall, etc.
Gypsum board is a material used in construction for covering, installing partitions, and lining the ceiling, mainly in rooms with a dry and unsaturated environment.
At the same time in a situation where you need to align the ceiling gypsum board, there are several positive aspects.
Gypsum board of this company can be used indoors, for which versions of sheets from two and a half to three and a half meters in length, but with a standard width are presented.
In combination with a bright backlight,two- and three-level gypsum board structures look extraordinarily luxurious.
But keep in mind that the use of gypsum board construction is best only in cases of a completely uneven surface.
Waterproof gypsum plasterboard sheets are marked with letters(moisture-resistant gypsum board) and painted in greenish color.
In other cases, once enough to trim the gypsum board false ceiling(GKL), to get a perfectly flat surface for dozens of years.
It is a fiberglass mesh tape designed for use with joint compound to reinforce gypsum board joints, repair drywall, etc.
The walls of the containers must be warmed,sheathing gypsum board or plywood sheets, and then dyed, oblitsevat clapboard or by any other finishing material.
The frame in this situation is quite simple anddiffers from the metal structure intended for the gypsum board ceiling only in that it is usually installed across PVC panels.