ஆங்கிலம் Th step ஐப் பயன்படுத்துவதற்கான எடுத்துக்காட்டுகள் மற்றும் அவற்றின் மொழிபெயர்ப்புகள் தமிழ்
{-}
-
Ecclesiastic
-
Colloquial
-
Computer
Th step: let it dry.
Th step: remove the dust.
Th step Karuppusamy temple.
Th step: The front is almost finished!
Th step: Put on the upper wooden board.
Th step: Now the felt rose is formed.
Th step: Center is now a round, free space.
Th step: Now the bending process begins.
Th step: Now 5 felt circles are folded.
Th step: Finally, the periscope is decorated.
Th step: Afterwards, the origami Santa Claus is turned back.
Th step: Then moisten the surface of the filling compound.
Th step: Are you satisfied with the look of your Wollstern"gt;.
Th step: Now all fabric pieces are cut with scissors.
Th step: Two opposite corners are now folded two boxes far inwards.
Th step: Now the salt dough pendants in the oven at 150° C for three quarters of an hour.
Th step: Cut the cuff in the just calculated width and a length of about 8 cm.
Th step: Now the clown needs only one suspension- just thread another piece through the hole in the hat.
Th step: Also the size of the face section is divided by two(in my children's hood thus 16 cm).
Th step: Then the tip of the tail is hit at any point so that it points vertically downwards.
Th step: Now put the baking sheet in the oven and let the peppers cook until the skin is completely dark.
Th step: Now the clown needs small holes in many places, so that you can connect it later with the threads.
Th step: Cables often break loose due to the movement of the machine and they can actually be soldered again.
Th step: skirt and top are now folded right to right at the opening, pinned and sewn with zigzag stitch.
Th step: Finally, the stars only have to be attached to a piece of thread and already the wooden stars can be hung.
Th step: I would like to make the front of our birthday crown in two different fabrics, so that the lower part has a different color.
Th step: Since we sew a zipper as a mouth, we need a light jersey fabric behind the front, so that the filling cotton at the end can not come out.
Th step: Lay the first template on the mass and trace the outlines with a sharp knife to have the part of the house in the sequence as modeling clay.
Th step: If you can solder, you could repair the cold solder joints yourself, but it is not a problem if this is done by a professional. It's just safer.