英語 での Measurement target の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
There are two types of measurement targets.
If your measurement target is not included in the table above, please feel free to contact us.
Select a layer of pad as a measurement target.
Select by measurement target Bacteria, insects, etc. Contamination, etc. Living things Trace of living things.
You can also combine different measurement targets.
It applies a pattern to measurement target and compares the output signal and the expected value and judge Pass/Fail.
Capture digital codes output from the measurement target.
(1)Turn off the measurement target channel.
Fixed an issue that an error may occur whenchanging the pin name of the pin set as the measurement target.
By setting a"Measurement Item" and"Measurement Target", it is possible to measure various target distances.
Can specify pattern program(combination of input value andexpected value) to the measurement target.
Used most commonly because of no limitation by measurement targets although the sensitivity is lower than the ground type.
Digital Output Capture IP is analgorithm IP that captures a signal output from a measurement target as 0/1 data.
Vion automatically detects the measurement target product by displaying the status of the product versus the measurement. .
(6)Connect the I/O channel path to the measurement target channel.
Field of View(FOV) All the measurement targets need to be measured at a distance in which the target object image size equals or exceeds the FOV.
(2)Detach the I/O channel path from the measurement target channel.
These alerts not only highlight that the measurement target is trending beyond tolerances, but also provide advanced intelligence into the process and why the situation is occurring.
Finish a measurement by selecting a measurement target by a click.
Ex. Distance between the centers of a board outline and a drill The edge of anobject selected by a click will be a measurement target.
Especially, when the speed is high or the distance to the measurement target is close, the tendency tends to be noticeable.
When Vion is placed on the measurement target, the automatic detection function immediately recognizes DC/AC/Resistance, so you don't have to worry about the risks of damage due to wrong selections.
Since information on the reflected light from the sensor is recognized as a person orobject by its own algorithm, the measurement target does not have to hold any device.
Effects of Water Vapor A large amount of moisture in the air between the measurement target and the sensor may absorb infrared rays, resulting in a measured temperature lower than actual.
Go back to the list of"all products" Infrared Temperature Sensor An infrared temperature sensor detects theinfrared emission energy emitted from the surface of the measurement target, and converts it into a temperature signal for output.
The condition in which the measurement target is too small to satisfy the FOV conditions is sometimes referred to as"FOV chipping," which does not allow accurate temperature measurement because it could also include measurements of non-target areas.
Go back to the list of"all products" Emissivity(ε)The infrared energy emitted from the measurement target has a specific emissivity according to its composition and surface finish.
The OS137A comes in a NEMA 4 rated 1" diameter stainless-steel housing andcan be used at distances up to 48" Note: the measurement target should fill the field of view of the sensor.
Especially for digital measuring instruments that can measure in units as small as 1/1000,the measured value may not be fixed depending on the measurement target, which can lead to confusion about which value to select.
On the other hand, if we are to break down measurement barriers and develop new and practical measurement technologies, we must also make use of advanced engineering intellect andscientific knowledge in disciplines far removed from that of the measurement target. These disciplines would include, for example, physics, chemistry, electronic engineering, information technology, precision engineering, and biology.