英語 での Rotational speed の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Rotational speed measurement.
This value defines the rotational speed. Set it to 50.
Rotational speed of the rotor.
The tool hashigh grinding power even at low rotational speed.
Rotational Speed Ratio 1/2.
They are suited for all common rotational speed ranges.
The rotational speed is same as before.
Permissible maximum input rotational speed(Grease lubricant).
Suitable for applications requiring high accuracy and high rotational speed.
The beginning rotational speed is no more than 7000RPM.
Shaft Vibration Axial Position Eccentricity Temperature Rotational Speed etc 8.
Timing lubrication type(Rotational speed control type/Load variation follower type).
Intelligent control systemhas automatic protective functions to lower rotational speed.
Timing lubrication type(Rotational speed control type/Load variation follower type).
The monitor and display on the genset's water temperature,oil pressure, rotational speed, battery voltage, running hours.
SG-2 Magnetoelectric rotational speed sensor use of electromagnetic induction principle.
Precision transient speed instrument/ rotational speed sensor DF9011.
Can measure rotational speed generated by rolling and pitching movements caused by waves.
Higher values will increase the rotational speed of the vortex.
Rotational speed sensor thermal expansion monitor DF9032 DEA, 0- 10Hz frequency response.
Easy particle size control by adjustment of the rotational speed and the suction air volume.
The varying rotational speed of the pump protects the motor from overload and over-heating for longer-life operation.
Machine axes are defined in machine ID by their direction, rotational speed(or linear feed) and physical limits.
A digital inverter first uses sensors to gather data about environmental conditions(humidity, temperature)and the motor's rotational speed.
The main gearbox of the helicopter Rotational speed of modern gas turbine HPT ranges from 6000 17000 to rev/ min.
The frequency converter. New: the Aerzen Turbo frequency converter(TFC),which controls only the rotational speed based on the motor current.
In the setting of the machine, the rotational speed of the spindle, please enter the rotational speed per minute as integer.
Its stand-alone amplifier modules record relevant measured quantities, such as force, pressure,temperature, rotational speed, and torque for internal digital processing.
Note 1 The permissible average input rotational speed has been set in order to control temperature increases due to heat generation by the speed reducer.
Sumitomo Heavy Industries original gear mechanism and long track record prove high reliability.The speed reducer which decelerates the rotational speed and generates outputs.