英語 での Tensile force の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Tensile force.
Maximum tensile force.
The tensile force the number of the vernier is 0- 4.
The standard valuesare measured in a state where there is no tensile force.
Temperature and tensile force both are adjustable.
Tensile force is received by the CF laminate, improve the bending strength.
Increase tensile force slowly to avoid slipping of the wire or even damage of the teeth.
During cargo work,the lid is kept adequately tight by tensile force provided by compressed air.
Uniform thickness, good tensile force, moderate difference in transverse and longitudinal values;
It adopts coniferous wood pulp to process and copy, all ultra-long fiber, uniform thickness,good tensile force.
When fuse is fixed and the tensile force 5N is applied in direction to lend.
Wire Rope Braided Sling: 1, the actual breaking strength of snap shall beat least 70% of the minimum breaking tensile force of the corresponding wire rope.
The strong tensile force is that the mobile phone film can be folded freely without leaving creases.
The yarn of the mixing is strong in the tensile force, and does not cut first of all during sewing.
If too high a tensile force is applied to the piston rod, an overload valve in the piston will open automatically and release the lock.
Measurements were taken of both the clamping force of the clamping module and the tensile force of the block with the steel wire.
When a material receives a tensile force P, it elongates in the axial direction while contracting in the transverse direction.
Ideal for culvert drainage in farm land and the drain layer method,which exerts a tensile force on the pipe(agricultural culvert drainage works).
Equal length& tensile force of Ne items(Asian traditional sizes) may be substitute each other for Nm items(Europe, USA, Canada traditional sizes)**.
The two presses andall the reference transducers from HBM are designed both for tensile force and compressive force testing.
The textile printer equipped with accurate tensile force device for media feeding and taken up to ensure the feeding error rate less than 0.3%.
The towers are 360°movable, freely and flexibly, the cylinder works vertically without any components forces consumption,powerful and accurate tensile force.
This new-generation polyester mesh realizes high tensile force, suppression of tension aging variation and print dimensional stability.
Because tensile force can be added from the tip of the chord when rolling, the Zoom-Mill™ rolling method is superior to other methods for reducing off-gauges during reverse rolling, with better threading stability, plate thickness precision and shape.
In an adhesion test,a layer is stripped off a test specimen using an applied tensile force- this results in tearing at the bonded surfaces.
The air-expansion shaft is used when paper feeding,also equipped with the tensile force brake control system, which can control tensile force of paper feeding automatically;
Albert HoltMost of the tests are static,it is only when testing to destruction with compression, tensile force and burst testing that dynamic tests are performed.
The strength of the solder joints is very high,each solder joint can withstand the tensile force of 5kN, even tearing the steel plate, still can not separate solder joints.