英語 での The coefficient of friction の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The coefficient of friction was 0.3.
However, it is important to secure the coefficient of friction stably.
Water recovery The coefficient of friction decreases when friction material gets wet.
In buildings such as buildings,the joint surface is purposely rusted, and the coefficient of friction μ is 0.45 or more.
人々も翻訳します
In solvent and water based coatings the micronized amide wax performs as scratch resistance additive andlowers the coefficient of friction.
The coefficient of friction is not a function of mass or volume; it depends only on the material.
In these systems, it can help to reduce the coefficient of friction(COF) as well as provide mar resistance and good slip.
The coefficient of friction can be reduced by making the surface slippery or forming it to retain oil.
It measures friction force and normal force to obtain the coefficient of friction(COF) as a function of time.
The coefficient of friction is defined as the recorded force divided by the weight of the sled.
For example, a resin piece for extremely low runs of the coefficient of friction is attached to the undersurface of the elastic cord.
The coefficient of friction of chromium plating is extremely small;the smallest among commonly used materials.
Part 2: Increase in the coefficient of friction Hardened, jagged iron plate(with μ= 1.0 or more).
And our tungsten carbide coating material is used to create DLC(diamond-like carbon)layers that lower the coefficient of friction of the injection needle.
However, for accurate timing, the coefficient of friction must be known, and friction must be kept constant.
Water recovery is the behavior of the coefficient of friction recovering due to the removal of water during braking.
Particularly when employed with a soft inorganic powder, sliding characteristics on guidepoles with rough surface are enhanced and the coefficient of friction of the backcoat layer can be stabilized.
Surface of Implements: Wood dust from burning can form natural small clay particles,increase the coefficient of friction, keep beautiful, individualized and are less likely to fall off at the same time.
Part 3: Increase in the coefficient of friction⇒ Increase the coefficient of friction of the steel plate interface by shot blasting. μ= 0.40 to.
Its main function is to support the mechanical rotator,reduce the coefficient of friction in the process of the movement, and guarantee its rotation accuracy.
As you can see from the above calculation example,increasing the coefficient of friction on the surface has the same effect as increasing the number of bolts.
Occurs when the coefficient of friction between the material and another material,the material and the screw, or the material and the heating cylinder is unusually low or unusually high.
Therefore, in applications that heavily emphasize the absolute value of the coefficient of friction, it is desirable to perform actual measurements under practical conditions with a dummy.
There is also a difference in the coefficient of friction, and asphalt is slightly infiltrated with rainwater, but there is also a difference that water accumulates on the iron plate.
Michel Almosnino provides details:"Owing to this system, the coefficient of friction is very low, ranging between 0.06 and 0.09. The tightening torque is therefore lower, thus making the assembly and disassembly easier, particularly during maintenance operations.