英語 での The parameter settings の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Check the parameter settings.
Are there templates or presets for the parameter settings?
The parameter settings are as follows.
You can also change the parameter settings of a technical indcator.
After initialization by pressing on the reset button, make the parameter settings again.
Adopting windows platform, and all the parameter settings can be processed in the dialog box, and it operates.
Adopting windows platform, all the parameter settings can be processed in the dialog box, and it operates easily.
How to change the settings oftechnical indicators You can also change the parameter settings of a technical indcator.
Often, the parameter settings of your Quick Controls are initially different from the settings of your hardware controls, for example, when the hardware controls control, different Quick Controls on different tracks.
Effect presets store the parameter settings of an effect.
Dialect classes can be registered by name, so that callers of the csvmodule do not need to know the parameter settings in advance.
Write the motion file with the parameter settings in the combo box.
To set the internal of measurement at every 0.1 s, input the following logic signal or non-voltage contact point to the connector pin(TRIG IN)between B and D.* It is effective when the parameter settings from 1 to 7 of the TS-2600 are ON EXT.
In creating our strategy, we have released the parameter settings that have been optimized in the last three years.
It was also confirmed that the damper and other parts could be simulated by controlling the actuators mounted on the rapid prototyping bogie(Fig.4), and that the required vehicle motioncharacteristics could be created by changing the parameter settings.
Press the set key for six seconds, Enter the parameter settings, while flashing display E1;
Frequency converter frequency source is used in the numerical control system output 0~10V analog signal, corresponding to the operating frequency of 0~650Hz. AI0/GND accept the controller output 0~10V analog signal,the voltage value and the frequency converter in the parameter settings of the frequency range corresponding to the speed.
Box stacking tester Adopting windows platform, all the parameter settings can be processed in the dialog box, and it operates easily.
Reading, writing, editing, and saving parameters The time required forsetting can be slashed by editing the parameter settings on the PC and writing them to the unit in a batch.
When changing a preset of a VST plug-in while in Preview mode,the change in the parameter settings caused by the preset change is recorded automatically as automation.
Using Modifier Keys When using the mouse to change the parameter settings, modifier keys can be used.
Note 1(Range of ADVANCE): To make processing more convenient,it is necessary to limit the parameter settings of input nodes that are connected before nodes such as AudioStreamFromMic and AudioStreamFromWave.
Setting procedure(In the case of Nikkei average, 1pips= 1 circle,so the parameter setting is different from FX.).
Although there is an item of“losscutPips” in the parameter setting, I could not understand the meaning that it is not automatic trading because it does not support Rokcut.
On completion of the parameter setting, the GT10 beeps three times and the LED blue blinks three times.