公差 英语是什么意思 - 英语翻译

• tolerance
• tolerances
• tolerancing

在 中文 中使用 公差 的示例及其翻译为 英语

在出现的对话框中，您可以定义公差。
In the appearing dialog box, you can define the tolerances.

公差精度符合ISO492:2002的普通级、6级和5级。
The tolerances conform to ISO 492:2002, classes Normal, 6 and 5.

相同地，单侧(1-α,P)公差上限由Xn-k+1给定。
Similarly, a one-sided(1- α, P) upper tolerance bound is given by X n- k +1.

规格尺寸以标准所允许的公差范围为限。
The dimensions are limited to the tolerances permitted by the standard.

长度、宽度公差(±5%)高的容忍度(±5%),内部每1米分割在一个独立的单位。
Length/width tolerance(+5%) height tolerance(+5%) and internal partition into many units every 1 m.

我并不是说我完全反对它，”莫雷诺说，“但是公差水平非常有限。
I'm not saying I'm totally opposed to it,” Moreno said,“but there's a very limited tolerance level.”.

长度、宽度公差(+5%)高的容忍度(+5%)，内部每1米采用挡板被分隔成独立的单元。
Length/width tolerance(+5%) height tolerance(+5%) and internal partition into many units every 1 m.

我这辈子第一次我满怀信心地约会，理解，给，公差，完全接受。
For the first time in my life, I dated with confidence, understanding, giving, tolerance, and complete acceptance.

DINEN60584-3-2008热电偶.第3部分:延长电缆和补偿电缆.公差和识别系统.
IEC 60584-3- Thermocouples- Part 3: Extension and compensating cables- Tolerances and identification system.

如有明显转动不灵活，则表明轴的尺寸太大了，公差要下调。
If there is a clear rotation is not flexible, it means that the size of the shaft is too large, the tolerance to be reduced.

我们是一个宽容的人,但没有公差应该允许这种有毒的极端主义的空间在我们的国家。
We are a tolerant people, but no tolerance should allow the room for this sort of poisonous extremism in our country.

公差通常用℃表示，可以作为器件测量温度精确性的一个衡量标准。
Tolerances are usually expressed in °C and can be used as a measure of the accuracy of the device's measurement of temperature.

MultiMetrics是几何尺寸和公差(GD&T)技术和企业实现方面的全球领导者。
Multi Metrics is a world leader in Geometric Dimensioning and Tolerancing(GD&T) technology and corporate implementation.

模具公差范围在达到成形产品的1/5～1/10，而在配合处的精度要求更高。
Mold tolerances range from 1/5 to 1/10 of the formed product, and the precision requirements at the mating point are higher.

例如，如果规格上限为0.36毫米，规格下限为0.34毫米，则过程公差为0.02毫米。
For example, for an upper specification of 0.36 mm and a lower specification of 0.34 mm, the process tolerance is 0.02 mm.

公差极限1描述典型的测量偏差和对您的生产质量没有影响的TCP小变化。
Tolerance limit 1 defines the typical measurement deviation and small TCP changes that have no effect on the quality of your production.

因为一定的模具间隙仅适用于一定厚度范围的材料，若材料厚度公差太大；.
Because a certain mold gap is only suitable for materials with a certain thickness range, if the material thickness tolerance is too large;

中国灰姑娘”通过ADELINE日元麻将的链接公差因为我们了解中国文化对女孩的粗暴对待。
Chinese Cinderella' by Adeline Yen Mah links with Tolerance as we learn about the harsh treatment of Chinese culture towards girls.

线速度的高均匀性和符合规定的冷却过程对于尽可能降低生产公差非常重要。
High uniformity of the line speed and compliance with a defined cooling process is important to keep production tolerances as low as possible.

然后，它可以在考虑输入值、尺寸和公差以及现有补偿值的基础上，计算出正确的补偿值。
It can then calculate the correct compensation value based on the input values, dimensions and tolerances, and the existing compensation values.

柔性PCB线路板在制造时，许多情况下不得不面对这样一个事实，许多的参数超出了公差范围。
Flexible plate at the time of manufacture, in many cases have to face the fact that many of the parameters exceeds the tolerance range.

由于制造公差-任何延迟精确的长度取决于您所使用的实际电路中的元件的特性。
Owing to manufacturing tolerances- the precise length of the time period available depend on the characteristics of the actual components you have used.

同时产品内外销的不同也会导致客户对原料厚度公差要求的不同。
At the same time, the difference between internal and external sales of products will also lead to customer thickness tolerance requirements of raw materials different.

由于制造公差-任何延迟精确的长度取决于您所使用的实际电路中的元件的特性。
Because of manufacturing tolerances- the precise length of any delay depends on the characteristics of the actual components you have used in your circuit.

质量控制经理的任务很艰巨，那就是检验和保证所制造的零件符合客户的要求，规格和公差。
Quality control managers have the delicate task of verifying and guaranteeing that manufactured parts meet customers' requirements, specifications, and tolerances.

申请公差，最好的办法是只适用紧张和/或形位公差，以关键领域，这将有助于降低成本。
The best way to apply tolerances is to only apply tight and/or geometric tolerances to critical areas, which will help minimize cost.

估计0.5°C增加物种的最高温度公差集独特的每个调查进一步表明选择物种适应温度条件。
An estimated 0.5 °C increase in maximum temperature tolerance of the species sets unique to each survey further suggests selection for species adapted to hotter conditions.

使个人的公差和补贴强度和持续时间的休息,完成功能恢复变得越来越可能远远超过大约八个或九个优惠。
Making allowances for individual tolerances and intensity and duration of the breaks, complete functional recovery becomes increasingly unlikely much beyond eight or nine breaks.

协助检查，测试，调整和评估进入的电气，机电和电子部件和组件，以确保符合产品规格和公差.
Assist in inspection, testing, adjusting and evaluation of incoming electrical, electro-mechanical and electronic components and assemblies to ensure conformance with product specifications and tolerances.