冷端补偿 英语是什么意思 - 英语翻译

• cold junction compensation
• cold-junction compensation

在 中文 中使用 冷端补偿 的示例及其翻译为 英语

冷端补偿.
Cold Junction Compensation.

这就是所谓的“冷端补偿（CJC）”。
This is known as cold-junction compensation(CJC).

该RTD用于冷端补偿。
The RTD is used for cold junction compensation.

我讨论的三种技术都是冷端补偿的方法。
The three techniques I discussed are each methods of cold junction compensation.

此过程称为参考结补偿（冷端补偿）。
This process is known as reference junction compensation(cold junction compensation.).

这被称为冷端补偿。
This is known as cold junction compensation.

了解冷端补偿很重要;
Understanding of cold junction compensation is important;

为了进行精确测量，必须使用称为冷端补偿（CJC）的技术对其进行补偿。
To make accurate measurements a technique known as cold junction compensation(CJC) is employed.

其次，由于热电偶测量相对温差，如果系统要报告绝对温度，则需要冷端补偿。
Second, because thermocouples measure relative temperature differences, cold junction compensation is required if the system is to report absolute temperatures.

冷端补偿仅意味着知道冷端的绝对温度并相应地调整重新分配的温度值。
Cold-junction compensation simply means knowing the absolute temperature of the cold junction and adjusting the reparted temperature value accordingly.

为了进行精确测量，采用称为冷端补偿（CJC）的技术。
To make accurate measurements a technique known as cold junction compensation(CJC) is employed.

相反，大多数系统使用称为参考结补偿的技术（也称为冷端补偿）。
Instead most systems use a technique called reference-junction compensation,(also known as cold-junction compensation).

实用工具使用电子方法冷端补偿调整不同温度的仪器终端。
Practical instruments use electronic methods of cold-junction compensation to adjust for varying temperature at the instrument terminals.

内置冷端补偿（CJC）电路也可作为第9个通道来测试室内温度。
The built in Cold Junction Compensation(CJC) circuit can also be used as a 9th channel to measure room temperature.

一旦建立了冷端补偿方法，补偿输出电压必须转换成相应的温度。
Once you establish a method of cold-junction compensation, the compensated output voltage must be translated into the corresponding temperature.

通过串口读取完整的冷端补偿热电偶温度，需要14个时钟周期。
A complete serial-interface read of the cold-junction compensated thermocouple temperature requires 14 clock cycles.

为了实现精确测量，需要应用一种技术手段，我们可以称之为冷端补偿(CJC)。
To make accurate measurements, this must be compensated for, a technique known as cold junction compensation(CJC).

将使用何种类型的冷端补偿.
What type of cold junction compensation will be used.

注意，仿真器并不测试系统冷端补偿电路的精度，后者必须通过额外连接的热电偶单独测试。
Note that the simulator does not test the accuracy of the system cold junction compensation circuit, which must be tested separately with a thermocouple attached.

现成的冷端补偿IC可能很昂贵，并且通常仅精确到几摄氏度，但许多系统使用这些设备。
The off-the-shelf cold junction compensation ICs can be expensive and generally are only accurate to a few degrees Celsius, but many systems use these devices.

在这篇博文中，我将简要介绍一下热电偶，尤其是冷（参考）接头和不同的冷端补偿方法。
In this blog post, I will take a short look on thermocouples and especially on the cold junction and the different cold junction compensation methods.

在这篇博文中，我将简要介绍一下熱電偶，尤其是冷（参考）接头和不同的冷端补偿方法。
In this blog post, I will take a short look on thermocouples and especially on the cold junction and the different cold junction compensation methods.

热敏电阻也可作为电子线路元件用于仪表线路温度补偿和温差电偶冷端温度补偿等。
The thermistor can also be used as an electronic circuit component for meter line temperature compensation and temperature difference cold junction temperature compensation.

因而，还需选用其他批改方法来补偿冷端温度t0≠0℃时对测温的影响。
Therefore, other correction methods need to be used to compensate for the temperature influence when the cold junction temperature t0≠ 0℃.

为了进行精确测量，必须使用称为冷端补偿（CJC）的技术对其进行补偿。
To make accurate measurements, this must be compensated for by using a technique known as cold junction compensation(CJC).

某些集成电路（如LT1025）设计用于根据熱電偶類型和冷端温度输出补偿电压。
Some integrated circuits such as the LT1025 are designed to output a compensated voltage based on thermocouple type and cold junction temperature.