报文 英语是什么意思 - 英语翻译

• message
• packet
• packets
• datagrams
• messages
• messaging

在 中文 中使用 报文 的示例及其翻译为 英语

报文RAM.
The Message RAM.

控制报文.
The Control Packets.

报文采用XML文件格式；.
XML document formats for messages;

串口报文.
Serial message SLED.

UDP在IP报文的协议号是17。
The protocol ID of UDP in IP packets is 17.

接收到的报文数目。
The number of notifications received.

报文RAM中的报文对象.
The Message Object in the Message RAM.

客户端发送ChangeCipherSpec报文。
So it sends this change cipher spec packet.

不应该发送ICMP差错报告报文的情况.
ICMP is not required to report errors on datagrams.

服务器也发送ChangeCipherSpec报文.
So it sends this change cipher spec packet.

签名者知道他签署的报文的内容;
The signer knows the contents of the message that he has signed.

无传输-代码的报文总是可接受的。
A message with no transfer coding is always acceptable.

可以看到整个连接花费了371个报文（3）。
We can see that the entire connection took 371 packets(3):.

每个CAN报文都能够传输0到8个字节的用户信息。
Each CAN message can transmit from 0 to 8 bytes of user information.

因此，应用程序必须选择合适大小的报文.
Therefore, the application program must select a message of appropriate size.

第2层涉及报文在单一本地网络中的传输。
Layer 2 is concerned with the delivery of messages on a single local network.

换言之，Scapy是一个强大的操纵报文的交互程序。
In other words, Scapy is a powerful interactive packet manipulation program.

客户端收到该报文，会进入FIN_WAIT_2状态。
When it receives this segment, the client TCP enters the FIN_WAIT_2 state.

存放在报文RAM中的数据不受硬件复位的影响。
The data stored in the Message RAM is not affected by a hardware reset.

应用程序正在该端口接收TCP连接或者UDP报文。
An application is actively accepting TCP connections or UDP packets on this port.

如果收到DHCPNAK，则重新发送DHCPDISCOVER报文。
If it receives DHCP NAK, then it wil send the DHCP DISCOVER packet again.

对于24位的IV,5000个报文后就有50%的机率出现重复的IV。
For a 24-bit IV, there is a 50% probability the same IV will repeat after 5000 packets.

它实现了传统SWIFTMT标准格式报文的交换。
It enables the exchange of messages formatted with the traditional SWIFT MT standards.

由于往返已经有371个报文，371X35ms大约是13秒。
Since we have 371 packets travelling back and forth, 371 x 35 ms gives us around 13 seconds.

HTTP请求报文的第一行叫做请求行(requestline)。
The http request first line of the message is called the request line.

一个例子是客户端发送无序数据包(如UDP报文)P1,P2到服务端。
One example could be a client sending unordered packets(e. g UDP datagrams) P1, P2 to a server.

BOOTP报文被封装在UDP分组中，UDP分组本身被封装在IP分组中。
BOOTP messages are encapsulated in a UDP packet, and the UDP packet itself is encapsulated in an IP packet.

如果数据长度代码少于8，则报文对象的其余字节将会被非指定的值覆盖。
If the Data Length Code is less than 8, the remaining bytes of the message object are overwritten by nonspecified values.

当报文处理程序将数据帧存放到报文对象时，它将会存放接收到的数据长度代码和8个数据字节。
When the message handler stores a data frame in the message object, it stores the received Data Length Code and eight data bytes.

当跳数等于0时，一个ICMPv6超时报文将被传送回源站点并且这包会被丢弃。
When the Hop Limit equals 0, an ICMPv6 Time Exceeded message is sent to the source address and the packet is discarded.