在 英语 中使用 The data link layer 的示例及其翻译为 中文
{-}
-
Political
-
Ecclesiastic
-
Programming
The data link layer.
数据路层.They operate at the data link layer.
因为它们是在数据链路层工作。For example, the data link layer originally dealt only with point-to-point net-.
例如，数据链路层最初只处理点对点的网络。Switches operate at the data link layer.
SWITCH工作在数据链路层。Firmware in the Data Link Layer includes two PRUs, one for each transceiver.
数据链路层中的固件包括两个PRU，每个收发器一个。Which of the following devices operate at the Data Link layer?
以下哪种设备工作在数据链路层？?It also shows how the data link layer divided into the LLC and MAC sub-layers.
该图说明了数据链路层如何分为LLC和MAC子层。网桥将网络的多个网段在数据链路层连接起来.It also shows how the data link layer divided into the LLC and MAC sublayers.
基于此，Adhoc数据链路层又分为MAC和LLC层。Most industrial networks use only the physical layer, the data link layer, and the application layer. .
大多数工业网络仅使用物理层，数据链路层和应用层。NDP runs on the data link layer, and supports different network layer protocols.
Ndp运行在数据链路层，因此可以支持不同的网络层协议。First the physical layer will convert the bitstream from 1s and0s into frames that get passed to the data link layer.
首先，物理层将位流从1和0转换为帧，传递到数据链路层。An LLC header tells the data link layer what to do with a packet once a frame is received.
LLC报头告诉数据链路层一旦帧被接收到时，应当对数据包做何处理。Like all IEEE 802 standards, 802.11 focuses on the two lowest levels of the ISO model,the physical layer and the data link layer.
像所有IEEE802标准一样，802.11标准也是以ISO模型最低的两层为中心：物理层和数据链路层。IEEE 802 splits the data link layer into two layers: Logical Link Layer(LLC).
IEEE802将数据链路层分成两个子层：逻辑.The data link layer receives packets from and directs packets to an upper layer protocol, in this case, IPv4 or IPv6.
数据链路层接收数据包并将数据包传输到上层协议，本例中为IPv4或IPv6。LoRaWAN defines the media access control(MAC) in the data link layer and is maintained by the LoRa Alliance.
LoRaWAN在数据链路层定义媒体访问控制（MAC），由LoRa联盟维护。In some networks, the data link layer handles transmission errors by requesting that damaged frames be retransmitted.
计算机网络第四…在有些网络中,数据链路层处理传输错误的做法是,请求重传被损坏的帧。控制局域网（CAN）协议决定数据链路层和在OSI模式中部分物理层。However, the Data Link Layer usually poses limits to the maximum frame size- for example 1500 bytes over an Ethernet network.
然而，数据链路层通常对最大帧大小构成限制-例如通过以太网网络的1500字节。A bridge operates in the Data link layer while a router operates in the network layer. .
交换机工作在数据链路层，而路由器工作在网络层。The data link layer is responsible for detecting changes in the PHY layer and establishing a protocol to send data. .
数据链路层负责检测PHY层的变化并建立发送数据的协议。Because the data link layer is below the network layer, controls at this layer can protect both data and IP information.
由于数据链路层位于网络层之下，因此该层的控制可以保护数据和IP信息。The data link layer lies on top of the physical channel, which maintains the wireless communication between the users and the network.
数据链路层位于物理通道的上层，它维护用户和网络之间的无线通信。It's the data link layer that is responsible for taking packets from the network layer and placing them on the network medium(cable or wireless).
数据链路层负责从网络层接收数据包并将他们放到网络介质(有线或无线)上。It works on the data link layer, not only to expand the network distance or range, but also improve the network performance, reliability and security.
它工作于数据链路层，不但能扩展网络的距离或范围，而且可提高网络的性能、可靠性和安全性。
