영어에서 Characteristic impedance 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Characteristic impedance(").
Ps delay and 90 Ohms characteristic impedance.
Characteristic Impedance≤15Ω.
Here, Z0 is the characteristic impedance.
Characteristic Impedance: 75 Ohm.
Each country has the different Characteristic Impedance of PSTN.
Characteristic impedance(10MZ).
Of course, we can use it in any other countries which has the same Characteristic Impedance.
Characteristic impedance: 50 Ohms.
Terminations, or loads, offered by us are matched to 50 or 75 ohms characteristic impedance.
Characteristic Impedance: 50ohm.
Frequency Return Loss Attenuation NEXT PSNEXT ELFEXT PSELFEXT Characteristic Impedance Transmission Delay.
Characteristic impedance: 50 Ohm.
Terminations, or loads, offered by us are matched to 50 or 75 ohms characteristic impedance. Detail… Continue Reading.
Characteristic Impedance 50Ω/75Ω.
The cable used to connect the MIL-STD-1553 bus and stub devices has a characteristic impedance of 78 ohms at 1 MHz.
Characteristic Impedance: 50 Ohms.
The shielding layer of broadband coaxial cable is usually made of aluminum with characteristic impedance of 75such as rg-59.
Z0 is the characteristic impedance.
At present, the commonly used baseband cables have a shielded wire made of copper with a characteristic impedance of 50such as RG-8, RG-58.
Characteristic Impedance is three kinds of north America type, Europe type and Japan type.
Type BNC is one of RF coaxial connectors using a bayonet type coupling mechanism, characteristic impedance has two types: 50ohm and 75ohm.
According to Characteristic Impedance, it has a little different electrical feature, and also Attenuation should be less than -65dB at about 30KHz which is the start point of ADSL.
The shielding layer of cables commonly used for broadband coaxial cables is usually stamped with aluminum and has a characteristic impedance of 75such as RG-59.
Characteristic impedance 75, RF coaxial cable is commonly used in CATV networks, so called CATV cable, transmission bandwidth of up to 1GHz, the current CATV cable transmission bandwidth of 750MHz.
Our Loads provide a termination designed to absorb all the incident power with very little reflection, effectively terminating the line or port in its characteristic impedance.
There are 50ohm and 75 ohm about the Characteristic impedance, they are widely use in electronic instrument, communication equipment, internet system, microwave testing, cable assembly and Semiflexible and semirigid cable.
Our Loads provide a termination designed to absorb all the incident power with very little reflection, effectively terminating the line or port in its characteristic impedance.
Any port of a multi-port microwave device that is not involved in the measurement should be terminated in its characteristic impedance in order to ensure an accurate measurement.
Characteristics Impedance: 50Ω±2.