영어에서 Impurity content 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Impurity content Lower than 100ppm.
Filtering capability is in relation to the impurity content of the medium to be filtered.
Low Impurity Content Lightweight Fire Brick 950- 1150℃ Insulating Temperature.
Product name Product model Main element content Impurity Content(≤%) Mg.
Excessive impurity content of molybdenum electrode can also lead to reduce service life.
Testing Method 4.1 The main content is calculated by subtraction of impurity content, its analyse method is according to GB/T 4324.
Generally, the impurity content is kept so low that its presence is not detrimental to the properties of the steel.
This testing method of ammonium metatungstate has advantages of high sensitivity, good selectivity and small matrix interference to give a precise impurity content of bismuth.
As a result, there is an impurity content of cleaned molybdenum wire for impure cleaned molybdenum wire.
Using high quality raw materials, calcined alumina is being produced in the rotary kilnon the reasonable temperature, with the characteristic of high conversion rate, stable crystallization and low impurity content.
Molybdenum electrodes impurity content ratio and uniformity and high density is an important indicator of molybdenum electrodes.
Neutralization process is an effective way to produce high purity ammonium metatungstate crystalline, it can produce high purity AMT solution, reduce cost for subsequent crystalline process and impurity content.
Requirement 3.1 Product range According to different impurity content requirement of chemical specification, it can be divided into APT-0 and APT-1.
(2) the impurity content of the carbon black or graphite, and(3)the carburization temperature(the higher the temperature, the more the trace impurities are evaporated during carburization).
The melting point of molybdenum disilicide will decrease with impurity content increase, and therefore silicon block produced by smelting method after processing has high impurity content which are not suitable for carbon and sulfur analyzer used crucible filler.
High density and low impurity content of molybdenum electrode d is an important factor for rare earth metallurgy, and therefore during molybdenum electrodes production should to strictly control the density and impurity content.
A lot of factors such as microstructure, impurity contents in the tungsten, other alloying elements and heat treatment(for example annealing conditions) inflence the machanical properties of tungsten.
Iron and nickel electrodes impurity content of electrode is too high will cause electrode erosion by molten glass, resulting in electrode breakage, and it will reduce the life of the furnace as well.
TZM impurities content and main components are as following.
Impurities Content(% max).
S average particle size, apparent density, purity and impurities content.
It is divided into coarse, middle and fine grain size, the impurities content is subjected to national standard.
Doped tungsten wire has higher non-sagging properties by maintaining inter-granular strength and suppressing void production at elevated temperatures by reducing the impurities content using our own technology.
Apart from impurities content, oxygen content should be also controlled within a certain limit.