영어에서 Inner surface 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Smooth inner surface.
Because it has bright out and inner surface.
The inner surface of the ITO layer will not work properly.
Smooth and clean Outer/inner surface, no smudge and rust.
Bright annealed sanitary tube has very clean inner surface.
It is sprayed overnight on the inner surface of the shoe for 3-5 days.
Inner surface of the tank is round and smooth, providing a unobstructed road for the dust.
The finished solution is sprayed on the inner surface of the shoe.
Μm on the outer and inner surface of tubes in the delivery conditions+C and+LC.
Gradually the process was improved so that the stone could reflect light and its inner surface.
The heat vaporises the water from the inner surface of the bubbles within the dough.
The inner surface can be measured and reported if this is requested by the purchaser before PO.
If the pipes are hard to pass the inner surface of the pin is treated coarse file.
For all of the pipe adapters products,100% material inspection before shipment. Inner surface finish.
Seamless steel tube, inner surface of roller have water circulation system(made in china).
Cleaning the steam will quickly and efficiently"wipe off" the inner surface of food and fat.
On the inner surface of the arch are the names of more than 660 generals and more than a hundred battles.
Cleaning the heater and the inner surface of the tank of the heater is a necessary measure that will extend the life.
The advantage of Montery is two special grooves for drainage of condensate from the inner surface of the sheet.
In house facility for increasing inner surface of stainless steel sanitary tubings with Boroscope Instruments.
The most common one is"fog", or condensation, which forms on the inner surface of display's vandal shield.
The inner surface of the temple is decorated with frescoes of religious content, images, Nativity of the Virgin and associated with a church holiday scenes.
There are diamond-shaped or round lubricant grooves on the inner surface, incorporated as per the client's requirements.
Cold drawing bright heat treatment without oxidization 100%nondestructive testing inside flushing under the high pressure antirust oiling outer and inner surface.
The tubes are used in various critical applications with having inner surface free from oil, grease and dust particles.
The inner surface can be textured and the outer surface can be generally smooth, or both the inner and outer surfaces may be textured.
After the erection of the walls of the cinder block, the inner surface of the formed bowl requires waterproofing and final finishing.
It is necessary toperiodically clean the heating elements of the scale, change anodes, wash the inner surface of the tank.
During repairing, pay attention to that ring die inner surface lowest height must be 2mm higher than the bottom of overtravel groove.