영어에서 Network master 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The Network Master.
The data manager receives the message and examines the memory 1209 to determine which port the Network Master is on.
The Network Master.
The Mate does not add the party to the conference table but, rather, the Network Master adds this party to the conference table.
The Network Master.
If, however, the retry bit is set, the Mate must compare this message with the last received message from the Network Master.
The Network Master.
Therefore, it knows the ID of allMates of Mixes attached to the SCM ports and it also knows to which port the Network Master is connected.
The Network Master.
Whenever the Central 208 is operable, each Mix in the network recognizes the Central 208 as the Network Master regardless of the ID's of the Mixes.
The Network Master.
Since the message will alwaysbe recognized by any of the subdata managers, it can always be routed to the correct port which is designated as the Network Master port.
Network Master 1233.
If the path is available, then the Network Master must determine if the Mate is busy.
The Network Master sends this message after it receives the"Call Answered" message from the destination Mate.
After rearranging the tables of the network master, the program proceeds to a Return block 1370.
If the Network Master does not receive the acknowledge message, there is a fault somewhere in the return path and this is denoted as a system fault.
As described above, the response from the Network Master can indicate that there is no line available.
When the Network Master resides in the central processor or a LAN, the data link between the Network Master and the Mixes is through the LAN.
Of course, if the Mix Master task 1244 is inactive, the Network Master occupies one of the other nine ports.
The Network Master 1213.
Each time a message is sent from the Mate to the Network Master or a Mix in the Slave mode, an acknowledgement must be received.
When the Network Master is removed from the network, it is then necessary for a new Network Master to take over and update its table.
Therefore, any communications that are ongoing during the loss of a Network Master are removed and all the communication paths must be reaccessed.
The Network Master the Mixes.
For example, if a Mate 10 desires to converse with the Network master 1213, it transmits a message to the data manager encoded with the Network Master's ID.
The Network Master can either be resident on the associated Mix, a separate central processor on a LAN or the Master task running in a separate Mix.
This is placed into the tables of the Network Master to maintain a centralized information bank as to network status.
The all-in-one Network Master Flex MT1100A supports all the latest communications network technologies.
However, the use of the LAN for communication between the Network Master and associated Mixes in the Slave mode eliminates the need for transmitting data over the broadband network 210.