영어에서 Test stand 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Test stand pole.
Previous: Cubic Test Stand.
Cubic Test Stand》 CTS series.
Van Bodegraven's electric motor test stand.
Test stand frame of high rigidity.
Next: L-type Test stand/ Mounting bracket.
Test stand for electric vehicle drive systems.
Previous: L-type Test stand/ Mounting bracket.
Home/ Air Blow Heater/ products/ Cubic Test Stand.
Advantages of test stand technology from Kistler.
Engine or component test stands.
A camera test stand can be divided into the following basic parts.
Every customer can configure his test stand according to his needs.
Test stand for electric motors and electric drive systems Type 550957.
Home/ Halogen Point Heater/ products/ L-type Test stand/ Mounting bracket.
Two further test stands for quality assurance are in the planning stage.
HORIBA has been successfully constructing brake test stands for more than 80 years.
Insulation rope test stand with a water bag at the bottom, after the water is provided for the stent weight.
Van Bodegraven uses torque sensors and measuring equipment from HBM in the test stand.
We can also control and monitor test stand functions over a deterministic reflective memory data bus.
The Model DFE II is a compact, easy-to-use gauge for handheld or test stand applications.
We use modern simulation processes, test stands, and laboratories for physical and chemical tests. .
Load test stand 20 meters(for portable base station tower, the cable tower and some non-standard products test). .
To meet these demands, Kistler supplies scalable test stand solutions geared to specific applications.
Zero freely-drop test stand adopts the double-rail guiding device for stable and reliable lifting operation;
The reflective memory architecture allows us to completely control our test stands with memory reads and writes.
The freely-drop test stand can achieve the clamping fall tests for surface, edge and corners of specimen at different direction;
View different stations in the Development Centre in interactive 360° spheres- including the engine workshop, test stand and wind tunnel.
Even for electronic test, the test stands required actual flight hardware, which made the test solutions rigid and inflexible.
The CN616A is an excellentfit for OEM instrumentation, automotive and aerospace test stand, factory automation, and power generation applications.