영어에서 The backside 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
OSD 6 Keys on the backside.
Note the backside also has a shelf hanger.
This material with show the backside in reverse.
The backside provides a good firm grip, so your drinking glass will never slide.
Cooling fan on the backside to help heat radiation.
You still can see the backside marks clearly.
Adhesive layer on the backside of the glass for mounting.
Mounting holes on base bottom for tabletop security; VESA mounting on the backside.
Why can we not see the backside of the moon from Earth?
You can see that the backside is the battery housing.
I caught the peach blossom which bathed in the morning sun with up from the backside.
The backside blocking dielectric layer can be deposited on the physically exposed portions of the outer surfaces of the memory stack structures 55.
We mark the numbers and suits on the backside of the cards.
Cross structure in the backside is for higher bear load capacity and better buffering.
Smart Wallet Mobile Card Holder with 3Madhesive sticker on the backside is suitable for.
Stick, throttle and rudder(on the backside of the throttle) and you'd only need to use up 1 USB port.
It is a smartphone accessory which is very flat and attached to the backside of the phone. When you.
Otherwise it will become red, from the backside of the led screen, you could easily to know which one is good or falut.
Nitto Semiconductor Wafer Tape SWT 10T+R is an ideal product for processing semiconductor wafers,to be applied on the backside of the wafer(non-active side).
Meanwhile, when rainning, all things at the backside could rush down, no worry about the bird slipers.
While convenient as conventional kraft paper packaging tapes, it can also be overlapped, can write letters on the surface with oil-based ink, and the backside of the tape is nonslip.
And as we stood in line in an attempt to give my niece a better vantage point than the backside of the mother of number 58, I put her up on my shoulders, and she was instantly riveted by the sight of the princesses.
When printing to the backside of the lens, the critical registration of the fine"slices" of interlaced images must be absolutely correct during the lithographic or screen printing process or"ghosting" and poor imagery might result.
Very low profile make this kind of lights very nice looking, and hole on the backside, make it very good for heat dissipation.
After laser irradiation from the backside of the substrate, only the oxide TFT arrays were separated from the sacrificial substrate as a result of reaction between laser and laser-reactive layer, and then subsequently transferred onto ultrathin plastics(4μm thickness).