영어에서 The lasers 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The lasers are controlled.
Why aren't you firing the lasers?
The lasers we use are‘hot lasers'.
Dean, these aren't like the lasers in Entrapment.
The lasers are tuned low for small animals, Mark.
사람들은 또한 번역합니다
In figure 24, camera 241 receives scattered light from laser beams generated by the lasers L1, L2, L3& L4.
This makes the lasers truly high-performance tools.
The lasers have different functions with intuitive menus setted up in the system.
Activate all the lasers but take care, you can not push more than one laser at a time.
One of the lasers types most commonly used for material processing is the CO2 laser.
To keep the reputation of their large andspectacular nature alive, SlickLasers, a US-based laser light show company was asked to provide the lasers for this year's show.
Prior to opening each day, the lasers, mirrors, and sensor arrays should be aligned which takes approximately five minutes.
If one or both of the base stations fail to track in"A" mode, examine the red LEDs on the face of the failing base station while powered on through the lens of a camera phone(you can see the lasers best this way).
To use a simplified example, the lasers could input the question: what are the prime factors of 15?
The lasers of the TruMicro Series 8000 are pre-destined to manufacture flexible OLED displays in high numbers.
Primarily that the lasers are always pointed inside the machine, guaranteeing the best protection for the user.
The lasers have interfaces to control intelligent TRUMPF optics, such as monitored CFO focusing optics or PFO scanner optics.
Never look direct into the LASER beam.
The laser generates a weld pool on the component.
Consequently, the laser beam removes the material.
The laser structures the material at the nanometer level.
Less Pain: The laser seals nerve endings as it"cuts.".
The Laser Scanner.
The laser starts again for each track.
Track-at-once method the laser turns off after each track.
The laser generally has about 0.5 percent power stability.
Ronald, huh? With the laser eyes?