영어에서 The sealant 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The sealant becomes elastomer after curing….
Next: No.18 Point heating and drying of the sealant.
If the sealant has fully cured cut it off with a sharp cutter knife.
Using the trigger extrude the sealant with equal strength.
The sealant is environment friendly, no harm to human, safe to use.
In this case, observe how the sealant reacts to a moist environment.
The sealant around the media so that the air filter without any air leaking.
Usage: The sealant especially design for structural bonding and curtain wall adhesive constructions.
For maximum puncture protection andoptimal performance, we recommended that refill the sealant every 6 months.
If the sealant has not yet cured Soudal Swipex Cleaning Wipes offer a great solution.
On line apply with the sealant pump, the application surface should be clean, dry and oil-free.
Bend the lead wire at least 4 mm away from the seal. The damage of the sealant worsen the air tightness.
After applying the sealant, attach the wall of the aquarium to the bottom and press it a little.
Wipe on the sealant, let it sit for 20 minutes or so and wipe it off. Zero-VOC sealants are also available.
IS800 Series adhesive sealants utilize a moisture vapor cure system and release acetic acid vapors from the sealant surface as a by-product of cure.
Apply the sealant, let it sit for about 20 minutes, then wipe it off. VOC-free sealants are also available.
When the seam of the aquarium is flowing,it is appropriate to cut the sealant in place of the flow and fill the hole with the compound again.
It is tested the sealant in the tire can be punctured for100 times, works for every 3-6 months, just add another bottle sealant,….
The sealant will be injected into tire before puncture, spread out by the centrifugal force, forms a protective layer coated inside of tire surface, when the objects puncture the tire, the sealant will be pushed by air force to the hole and form a plug to seal it instantly, you may even not feel you have a puncture.
D-15 is often the main crosslinker of choice for silicone sealants and can be used by itself or in combination with other acetoxysilane to provide the sealant with targeted properties(such as desired cure rate, adhesion, etc).
There's sealant lining the edge of this glass.
Layers of rubber and sealant cover the inside wall.
These materials have the effect of prevent sealant triple bond.