영어에서 These valves 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Sometimes, these valves get clogged.
These valves are available extensive to the….
In addition, there are basically two types of these valves that are typically used.
These valves are specifically designed to improve the efficiency of the fuel.
In order for blood to move properly through your heart, each of these valves must open and close properly as the heart beats.
As a result, these valves are rarely used as a means of flow control;
When the blood flow pumpis not delivering blood, the valves that control the flow from the dialyzer to the inside dialysate pumps(and other balancing valves ganged together with these valves, as previously discussed) may be closed to prevent any fluid transfer from occurring from the dialysate side to the blood side.
These valves are known for their durability, constant performance and sturdiness.
(2) Swing: valve seat around the outside of the pin rotation, these valves have a single lobe, double valve and Orange Peel the points, but the principle is the same.
These valves bushes are used primarily in the water, wastewater, and industrial markets.
However, the function of all these valves are same in each type but each design has their own benefits.
These valves are both lighter in weigh and more durable than standard valves sold overseas.
Adjustable pressure valves- These valves regulate the flow of cerebrospinal fluid based on a pressure setting that can be adjusted.
These valves are also susceptible to disease or damage, causing regurgitation as a result of a leaky valve. .
The actuator controls the opening angle of these valves with great precision- it takes a maximum of 3600 impulses to open or close the valve, each impulse opening or closing the valve by roughly 0.02 millimeters.
These valves can be problematic as they often jam open and drain the tank, or fail to operate, causing severe damage.
With wet type solenoids, these valves ensure the low noise and the long life, moreover, ensure no leakage of oil outside of the valve. .
These valves are utilized in residential, commercial, and institutional applications for handling liquids, gases, and slurry.
These valves fully replace the RO2,DO2 flap-valves in A1- A2 configurations(which are located directly under cone of the tank).
These valves are also installed in the supply line in auxiliary hydraulic system where the pressure expected to surpass the main hydraulic system.
These valves are also installed in the supply line in auxiliary hydraulic system where the pressure expected to surpass the main hydraulic system.
As a result, these valves are rarely used as a means of flow control; they generally just stop flow completely or are unused.
These valves, used for cleaning filter elements in air filtration systems, are specifically designed for flat surfaces like square header tanks and flanged tank.
These valves vary in size, function and shape and you need to make sure you choose the right one for the specific function you require hydraulic actuator to perform.
These valves operate in a slightly different fashion, but they are able to deliver the needed amount of lubricant in much the same fashion as other types of valves. .
These valves are used in applications where sterile processes need to be maintained in the pharmaceutical and food industries without unnecessary and costly overhauls and replacement.
These valves allow to operate from a remote posion, inside the cabin for example, different kind ofvalves like directional control valves, tipping valves, etc.
These valves can also be used for re-circulation systems to maintain domestic hot water supply temperatures at levels temperatures above 55C(131F) that prevent the growth of harmful bacteria such as Legionella.
Both of these valve types can include over-drainage protection in the form of a siphon control device.
These two valves are controlled by an electronic controller 119.