Ví dụ về việc sử dụng Hard wood trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Morning Hard Wood.
Jessica bangkok loves the dark hard wood.
Lower cost than equivalent hard wood such as mango, oak, mahogany.
It can cut hard wood and service life is more longer, just need to sharpen it every 5-7 days(8 hours per day).
Self tapping screw Generally refers to the pointed, coarse teeth,texture hard wood screws, there are aluminum, plastic.
Brown armchair: Hard wood structure, double dowell jointed by screw and glue.
The simplest way to describe a piece of wood thatsaid it was in the form of soft wood or hard wood.
Wear resistance higher than YM6, suitable for machining hard wood, raw wood, aluminum bar, brass rod and cast iron.
This tiebacks are suitable for hard wood and wall, when you want to mount the tieback on wall, please drill a hole in the wall and embed the plastic expansion bolt first.
Cuts through stainless steel and other materials pipe,nail-embedded wood, hard wood floors, plywood and plastics.
This small wood chipperis mainly used for chipping wood, hard wood and tree branches into small wood chips, which can be used as a fertilizer, fuel, paper mills and wood factory, woo pellet plant.
Coarse thread Stainless steel drywall screw Is generally fingertips head,coarse thread, a hard wood screw, there are aluminum alloy, plastic.
The essential oil that is derived from this hard wood(although it is actually a bit softer than some other woods like teak) can arouse soft and tender feelings for your partner and can result in a very good time in the bedroom.
It is for wet&dry under high pressure and heavy duty polishing, for polishing rotors&blade, low carbon steel,malleable cast iron, hard wood and high cobalt∋kel alloy.
Drying cost Low cost, but high cost for thicker and hard wood Low cost, but high cost for thicker and hard wood higher higest higher, but low cost for hard wood, thicker wood and secondly drying for wood. .
The front panel of the stables is available in a variety of standard designs, which included hinged doors, top and bottom hinged doors,panels with hard wood infill, sliding doors, sliding doors with top hinged.
JA135 is JB 5 soft aluminum oxide abrasive cloth It is high grade machineuse flexible abrasive cloth used for hard wood soft woods aluminum oxide paint surface of furniture The base is J wt cloth The coating density is close coated It can be made into abrasive belt and abrasive roll The main grit is P60 P800 As a….
The front panel of the stables is available in a variety of standard designs, whichincluded hinged doors, top and bottom hinged doors, panels with hard wood infill, sliding doors, sliding doors with top hinged.
JB 5 soft cloth TJ135 is aluminum oxide abrasive cloth It is middle grademachine use abrasive cloth mainly for hard wood soft wood furniture painting The base is J wt cloth The biggest width is 1 4M The coating density is semi open coated It can be….
A thick MDF panel at a density of 700- 720 kg/m3 may be considered as high density in the case of softwood fibre panels,whereas a panel of the same density made of hard wood fibres is not regarded as so.
The tungsten ones are used on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics,plastic, hard wood, especially on hard materials whose hardness can be above HRC70.
Forest use mobile branches wood chipper Description of wood shredder 1 Design and produce according to CE certificate Each product inspected before delivery 2 Applications This wood chipperis mainly used for chipping wood hard wood and tree….
Laminated Flooring is generally a HDF based tongue and groove interlocking flooring system that rest on top of theexisting substrate like~ concrete slab, hard Wood Flooring or virtually any other flat hard surface that is suitable for installation.
A thick MDF panel at a density of 700- 720 kg/m3 may be considered as high density in the case of softwood fibre panels,whereas a panel of the same density made of hard wood fibres is not regarded as so.
PZ633 is zirconium oxide abrasive cloth It is for wet dry under high pressure and heavy duty polishing for polishing rotors blade lowcarbon steel malleable cast iron hard wood and high cobalt nikel alloy The base is Y wt cloth Coating density is….
Product Description 1 Strong body material is Carbon steel Q235 can run steadily without ground foundation 2 Blade material is H13 more hard andanti wearing It can cut hard wood and service life is more longer 3 Feed roller adopts 45 Mn steel This….
Large Capacity Wood Chipper for Sale For our Rotex wood chipper Strong body with the carbon steel Q235 Wood chipper blades with theHeavy steel H13 It can cut the hard wood and just need to sharpen it every 5 7 days Feed roller with the steel 45 Mn….