Ví dụ về việc sử dụng Hastelloy trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Hastelloy Heat Exchanger Tube.
What are the characteristics of Hastelloy C276?
Hastelloy G may further handle both acid and alkaline solutions.
In what applications is Hastelloy C-276 used?
Hastelloy G may further handle both acid and alkaline solutions.
In what applications is Hastelloy C-276 used?
Hastelloy is a registered trademark name of Haynes International, Inc.
Yuhong Group supplies Hastelloy C276, C22, X, B3 and B2.
Hastelloy G shows good resistance to sulfuric and phosphoric acids.
In many corrosion media only Tantalineshows a dramatically better cost/performance ratio than Hastelloy.
Hastelloy X is also It has also been found to be resistant in petrochemical applications. Ref 2.
Although there are several variations of the Hastelloy nickel alloy, Hastelloy C-276 is by far the most widely used.
Hastelloy C-276 alloy is an improved wrought version of Hastelloy alloy C. Ref 2.
High Performance Alloys stocks and produces Hastelloy B2 in this grade in the following forms: Bar, loose coil, sheet/plate, fasteners.
Hastelloy B-3 is the alloy in the Hastelloy family that shows best resistance to hydrochloric acid. Ref 2.
For systems that operate in environments of high pressure,the diaphragms are made of materials like Hastelloy, Inconel, Monel, stainless steel or titanium.
The Hastelloy C-4 is an Hastelloy grade, that resists the formation of grain-boundary precipitates in weld heat-affected zones.
Also we have different kinds electrodes material,such as Hastelloy C, Titannium, Tantalum, Pt/Iridium alloy to meet different kinds acid or alkali flow measurement.
Hastelloy C-2000 UNS N06200, Mostversatile, corrosion resistant alloy with excellent resistance touniform corrosion in oxidizing or reducing environments.
A05 material cyclone cone, A61 high chrome impeller, A61 high chrome volute, Alloy 20 Pump Parts, Alloy 20 impellers, hastelloy alloy impellers, hastelloy alloy volute, Ductile iron bearing housing, etc.
Hastelloy C22 can be used for many applications such as marine, power, chemical processing, pollution control, paper processing, and waste disposal industries.
For those conductive liquids that are corrosive,the sensor's electrodes need to be constructed from titanium, Hastelloy B or C, or 316 stainless steel and insulated with spacers, separators or holders of ceramic, polyethylene and Teflon-based materials.
Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids.
Corrosion resistant processing equipment that is built using special alloy such as titanium, niobium, zirconium,tantalum, hastelloy, inconel, nickel and monel with perfect welding and high-end technology is what Perfect Welding Technology insists on making for their clients' greatest satisfaction.
The Hastelloy trademark is applied as the prefix name of a range of corrosion-resistant metal alloys under the material term superalloys" or high-performance alloys".
Nickel& cobalt base corrosion,temperature and wear-resistant alloys, such as Hastelloy B2, are classified as moderate to difficult when machining, however, it should be emphasized that these alloys can be machined using conventional production methods at satisfactory rates.
The Hastelloy trademark is applied as the prefix name of a range of corrosion-resistant metal alloys under the material term superalloys" or high-performance alloys".
We offer a wide range of hastelloy plates, hastelloy sheets& hastelloy coils that finds application in various industries all over the world.
Other corrosives Hastelloy C-276 has resistance to are oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic.
Hastelloy is a registered trademark name of Haynes International, Inc. The Hastelloy trademark is applied as the prefix name of a range of corrosion-resistant metal alloys under the material term“superalloys” or“high-performance alloys”.