Ví dụ về việc sử dụng Resistance value trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Internal resistance value(mΩ).
Resistance value and tolerance.
Like platinum, copper has a resistance value.
Resistance value tolerance:±5%;
Since a conductor resistance is added to the resistance value.
The surface resistance value is 108-1011 Ohm.
The ohms scale is compressed,so resolution is better at lower resistance values.
Resistance value: 10000 times than ordinary glass.
(2) Precision:± 5.0% auto temperature compensate,could be calculated to resistance value at 20℃.
Resistance values in other ranges mean that the detected Ethernet power devices are invalid.
In the case of two-wire measurement, the resistance value of the SPD can distort the measured result.
Its resistance value hardly changed even after being expanded/contracted 10,000 times on the skin.
Using Ohm's Law a few more times, we can determine the test resistance value for 1/4 and.
If such resistance values need to be measured, nothing but a high-voltage ohmmeter will suffice.
The meter can becalibrated in units of temperature because the only changing resistance value is that of the RTD.
Resistance value, tolerance, and sometimes even temperature coefficient can be determined by reading the color code, indicated by a series of colored bands on the side of the component.
Using Ohm's Law a few more times, we can determine the test resistance value for 1/4 and 3/4 scale deflection as well.
At this time, the external temperature measuring element transmits the temperature signal measured in thesteam chamber to the field control cabinet as a resistance value.
(3) Testing way: use sis ends method,testing the resistance value of Commutator segment and winding welding point.
System has sensorsto monitoring temperature and humidity,The software has the function of turning on/ off resistance value conversion.
When the circuit is in disorder,the PTC will generate heat suddenly, and the resistance value will go up to the high state, which make the circuit in the state of relatively"reaking up" to protect the circuit.
Again, by matching the color of the second band with its associated number in the digit column of thecolor chart we get the second digit of the resistance value and so on.
The intelligent digital display device converts this resistance value into a current signal, and then transmits the current signal through the signal transmission cable to the process control station in the central control room.
The Beta( calculated between 25℃ and 50℃)range from 2500( low resistance values)to 5000(high resistance values).
By matching the color of the first band with its associated number in the digit column of the color chart below the first digit is identified andthis represents the first digit of the resistance value.
This vector notices thebehavior of a magnetic body depending on a change of resistance value of the magnetoresistive component.
We take strict control of inner diameter, outer diameter, number of teeth, radial run-out, concentricity, surface roughness,rigidity, resistance value so as to ensure the best performance of rapier loom.