Ví dụ về việc sử dụng These motors trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Both these motors deliver a punchy performance;
This page has lots of pictures, descriptions,and advice on how to get these motors running well.
You can buy these motors for around $150 to $200 on e-Bay.
Understanding Oli Evinrude and his work developing the two cycle marine engineswill give you a great appreciation for the evolution of these motors.
These motors are suitable for use with 50 and 60 Hz mains.
Optimized for rapid acceleration, these motors have a rotor that is constructed without any iron core.
These motors are used in robotic arm machines, flight controls and control systems.
With ABB's first-class quality and strong support, the functions of these motors are recognized by a large number of customers and OEMs.
So one of these motors drives about two soccer fields of modules.
Since in modern electric vehicles alternating current isgenerated from direct current by an electronic circuit, these motors can be considered as DC motors. .
These motors are developed for rolling shutters and are available in various specifications as per the clients requirements.
Since I am doing this for my enjoyment and satisfaction,I consider working on these motors to be a hobby, and I can take all the time I want to do the job right.
All these motors will guarantee the stirrup bender works powerfully and bends steel bars in most accurate way.
I learned that some of the parts on these motors would need to be replaced, even if the motor was stored properly but for a long time.
These motors act as small servos to push against the direction that the camera wants to move, dampening and reducing shake.
If you have a scored cylinder, these motors could sneeze(fire within the block) and force pressure down the fuel line and into the tank.
These motors are comparatively heavy, which would mean there would be a significant amount weight focused at the joints, making the mech that much harder to balance.
In addition to explosion protection requirements, these motors also meet requirements which are not specified for explosion protection, such as Ecodesign, EMC and the RoHS Directive.
When these motors are linked up by software, you gain complete control of how much the camera will move and what resistance to shaking it will see.
Batteries to power these motors will come from high performance cells capable of generating more than 100 kilowatts of power.
These motors were commonly used to drive the capstan(s) of magnetic tape drives and are still widely used in high-performance servo-controlled systems.
If I were to work on these motors on any production mode, or for a customer, I don't' think I would enjoy it at all.
Although these motors can be a bit bulkier than conventional motors, but their efficiency is higher and they also produce less noise and have better life.
My desire is not to restore these motors to the point that they are show pieces, but rather to end up with something that I can enjoy using for many years.
They sold these motors by the dozens to fishing lodges, camps, and resorts in Wisconsin, Minnesota, and Canada where Ralph Evinrude and other OMC employees liked to spend time.
If the system design permits, these motors are configured for high maximum speeds of up to 20,000rpm, which allows the advantages of bar wave winding to be fully utilised.
In reality, these motors are easy to tune up and anyone with the time, patience, and minimal mechanical ability can get one tuned up and running well with relatively little expense.
These motors are widely used in air compressors, pumps, fans, refrigerator, medical instruments, small-size machines etc, especially for occasion where only single-phase power supply is available.
These motors independently control the left and right wheels, and so the torque is optimized to ensure outstanding vehicle stability and control as well as efficient power regeneration.
These motors along with a seized up 1996 Johnson 15 hp that I have sitting around, given up as too expensive to have repaired, gave me the challenge I needed for a good winter tune up project.