Ví dụ về việc sử dụng These two materials trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
So let's compare these two materials.
These two materials melt at approximately 100C, which is a practical lower limit for thermal coloration.
At the intersection of these two materials a“depletion region” appears.
CPUs are also filled with silicon and gold, but separating these two materials is difficult.
Read below to find how these two materials differ and how should you make a selection.
Replacing stainless steel with plastic was a big challenge as these two materials are entirely different.
At first glance, these two materials differ in color, but they differ in many characteristics.
In particular,we have no doubt about the ability to lighten the skin with these two materials.
Fundamentally, the difference between these two materials is that they have different amounts of carbon in them.
An outline of the properties thatare most relevant to injection molding for these two materials is shown below.
When comparing sweaters made from these two materials you will realize that they are very similar.
These two materials belong to medium carbon steel, and their strength, stiffness and toughness can meet the working requirements of the motor shaft.
Thanks to Latexco's many years of experience,Latexco is able to adjust the ratio between these two materials to meet the specific requirements of our customers.
The process of unifying these two materials, by specific selection and by accidental match, results in unexpected and endless possibilities.
Thanks to our many years' experience,we are able to adjust the ratio between these two materials depending on the specific requirements of our customers.
The combination of these two materials so that both components can mutually support and complement the existing deficiencies in the bitter as well as in turmeric.
But the challenge is, as we move to cities,cities are built in these two materials, steel and concrete, and they're great materials. .
The majority of the leather was tanned with oak bark but soft clothing, gloving and footwear leathers were tanned with alum, oil,and combinations of these two materials.
Passing a current through the junction of these two materials combines the electrons with the holes and produces photons, which is the light that you see.
These two materials are combined under high pressures and elevated temperatures to form ammonium carbamate, which then decomposes at much lower pressures to yield urea and water.
What this tells you is this is the concentration of these two materials at the time the solar system was formed, so we learned things about which materials were there when the planet was made.
S/310S These two materials, nickel and chromium content is relatively high, while increasing the Si content, making it have high temperature and corrosion resistance, which 309S can withstand repeated heating under 980, 310S use temperature reaches 1200 degrees, continuous use The temperature can be 1150 degrees, non-magnetic.
The combination of these two materials results in thermal expansion characteristics similar to those of silicone carbide, aluminum oxide, and beryllium oxide, used as chips and substrates.
The material inclduing Carbon Steel and Stainless Steel,and the nuts also with these two material.
American hose clamps also known as clamps The material inclduing Carbon Steel and Stainless Steel and the nuts also with these two material This type of Hose Clamp divided into small American hose clamps and large American hose clamps hose clamp width respectively 12 7mm and 14 2mm The adoption of through hole….
These are two materials that are not easy to buy.
However, these two different materials have very different methods of failure.
I have already warned Susu,now I am warning you, these two slave materials.”.
With these two never-before-seen materials, Mr. Nguyen Van My has made a great contribution to the worldwide index.