Hvad er oversættelsen af " ETHERNET-CONTROLLERE " på engelsk?

• ethernet controllers

Eksempler på brug af Ethernet-controllere på Dansk og deres oversættelser til Engelsk

Evaluation Module giver mulighed for test af alle Ethernet-controllere.
Evaluation Module allows testing of all Ethernet controllers.

Ethernet-controllere kan opdeles i to hovedgrupper varianter af hardware.
Ethernet Controllers can be divided into two main variants of the hardware.

Andre middelsvære baserede Ethernet-controllere på printet i EthernetRoomManager.
Other medium based Ethernet controllers on the PCB of EthernetRoomManager.

Sektioner hove henholdsvis 42 og 40 udgange tillader afprøvning af alle typer af Ethernet-controllere.
Sections hove respectively 42 and 40 outputs allow testing of all types of Ethernet controllers.

Stik af store eHouse bygningsautomatiksystemer Ethernet-controllere- CommManager, LevelManager.
Connectors of large eHouse building automation Ethernet controllers- CommManager, LevelManager.

Exe eller Ethernet-controllere direkte, bruger UDP-broadcast- samtidigt til flere enheder på et Ethernet-netværk.
Exe or Ethernet controllers directly, is using UDP broadcast- simultaneously to multiple devices in an Ethernet network.

Det skal gøres binært, til direkte dekodning status fra Ethernet-controllere uden eHouse. Exe ansøgning tilsyn.
It needs to be done binary, for direct decoding status from Ethernet controllers without eHouse. Exe application supervision.

Men LM335 Sensorer til Ethernet-controllere har ikke den fulde- omfattende måling og kan måle temperaturer på op til cirka 56 ° C.
LM335 Sensors for Ethernet controllers do not have the full-scale measurement and can measure temperatures up to about 56 degrees C.

Desuden, demo enhed har stik til automatisk test af alle Ethernet-controllere, ydeevne og hardware ressourcer.
In addition, the demo unit has connectors for automatic testing of all Ethernet controllers, performance and hardware resources.

Home Automation- Ethernet-controllere forbindelse. Stik- CommManager og LevelManager og andre store Ethernet eHouse system controllere.
Home Automation- Ethernet controllers connection. Connectors- CommManager and LevelManager and other large Ethernet eHouse system controllers..

Dette afsnit indeholder alle stik korrekt tilsluttet(indgange, Udgange) af Ethernet-controllere, til automatisk at søge efter controller test indlæst software.
This section includes all connectors properly connected(inputs, Outputs) of Ethernet controllers, to automatically check for controller testing software loaded.

I denne version af Ethernet-controllere: CommManager, EthernetRoomManager, etc., uafhængigt sende deres status på to måder, ikke kolliderer med hinanden.
In this version of Ethernet controllers: CommManager, EthernetRoomManager, etc., independently send their status in two ways, do not collide with each other.

Exe ansøgning ophører med at sende sit eget binære status UDP, fordi disse er de samme data, der i øjeblikket er spredt direkte fra Ethernet-controllere eHouse og det vil duplikere netværk trafic.
Exe application ceases to send its own binary status of the UDP, because these are the same data, that currently are spread directly from the Ethernet controllers eHouse and it will duplicate network traffic.

De digitale indgange på Ethernet-controllere er forbundet via” Træk Up” modstande den magt controller 3V3.
The digital inputs of Ethernet controllers are connected via“Pull Up” resistors to the controller power supply(3V3) voltage.

Binary Frame afkodning software af eHouse status standard er implementeret i skabelonen bibliotek til panel. Det skal gøres binært, til direkte dekodning status fra Ethernet-controllere uden eHouse. Exe ansøgning tilsyn.
Binary Frame decoding software of the eHouse status standard is implemented in template library for panel. It needs to be done binary, for direct decoding status from Ethernet controllers without eHouse. Exe application supervision.

De digitale indgange på Ethernet-controllere er forbundet via” Træk Up” modstande til regulatoren 3V3 spænding.
The digital inputs of Ethernet controllers are connected via“Pull Up” resistors to the controller power supply(3V3) voltage.

Hvis du vælger denne mulighed for eHouse. exe ansøgning ophører med at sende sit eget binære status UDP, fordi disse er de samme data, der i øjeblikket er spredt direkte fra Ethernet-controllere eHouse og det vil duplikere netværk trafic.
If you select this option for eHouse. exe application ceases to send its own binary status of the UDP, because these are the same data, that currently are spread directly from the Ethernet controllers eHouse and it will duplicate network traffic.

Stik af store eHouse bygningsautomatiksystemer Ethernet-controllere- CommManager, LevelManager@ Home Automation eHouse. Pro.
Connectors of large eHouse building automation Ethernet controllers- CommManager, LevelManager@ Home Automation eHouse. Pro.

Men LM335 Sensorer til Ethernet-controllere har ikke den fulde- omfattende måling og kan måle temperaturer på op til cirka 56 ° C. .I tilfælde af meget lave temperaturer kan også være virkningen af opvarmning selv ved overstrøm, fordi disse sensorer arbejder optimalt for 5V forsyningsspændinger.
LM335 Sensors for Ethernet controllers do not have the full-scale measurement and can measure temperatures up to about 56 degrees C. In the case of very low temperatures may also have the effect of self-heating by the because it works with larger current, because these sensors are working optimally for 5V supply voltages.

Samling og adskillelse ledninger kræver ikke smedning riller i væggene på grund af tykkelsen af strimlen er omkring 1 mm flad. Stik af eHouse Home Automation Ethernet-controllere: CommManager, LevelManager Pin Nej .1. felt er markeret med en firkant loddemiddel på printpladen og huset yderligere pilen slot.
Assembly and disassembly wiring does not require forging grooves in the walls due to the thickness of the strip is about 1mm flat. Connectors of eHouse Home Automation Ethernet controllers: CommManager, LevelManager Pin No.1. field is marked with a square solder on the PCB and the housing additionally arrow slot.

Ethernet-controllere kan opdeles i to hovedgrupper varianter af hardware: controllere store- baseret på CommManager/ LevelManager PCB controllere medium- baseret på EthernetRoomManager PCB I dette indlæg vil vi diskutere afprøvning og evaluering af store regulatorer(baseret på CommManager/ LevelManager) med Ehouse4Ethernet DEMO modul.
Ethernet Controllers can be divided into two main variants of the hardware: average controllers- based on EthernetRoomManager(ERM) PCB large controllers- based on CommManager/LevelManager(CM, LM) PCB In this post we will discuss testing and evaluation of large controllers(based on ERM) module using Ehouse4Ethernet DEMO.

For UDP-broadcast fra controllere udsendes fra ehouse. exe ansøgning skal være deaktiveret. Hvis du vælger denne mulighed for eHouse. exe ansøgning ophører med at sende sit eget binære status UDP, fordi disse er de samme data, der i øjeblikket er spredt direkte fra Ethernet-controllere eHouse og det vil duplikere netværk trafic.
For UDP broadcast from controllers broadcast from ehouse. exe application must be disabled. If you select this option for eHouse. exe application ceases to send its own binary status of the UDP, because these are the same data, that currently are spread directly from the Ethernet controllers eHouse and it will duplicate network traffic.

Ethernet eHouse(eHouse4Ethernet) I denne version af Ethernet-controllere: CommManager, EthernetRoomManager, etc., uafhængigt sende deres status på to måder, ikke kolliderer med hinanden: Hver controller fungerer som en TCP/ IP server besvarer forespørgsler om status panel, henviser endvidere forbinde panelerne og opretholde dem, indtil afbrudt eller anden grund.
Ethernet eHouse(eHouse4Ethernet) In this version of Ethernet controllers: CommManager, EthernetRoomManager, etc., independently send their status in two ways, do not collide with each other: Each controller works as a TCP/IP server responds to queries about the status panel, referring further connect the panels and maintain them until disconnected for any reason.

Stik af Ethernet-controllere Beskrivelse refererer til gennemsnitlige Ethernet-controllere: EthernetRoomManager EthernetHeatManager EthernetSolarManager Andre dedikerede Ethernet-controllere baseret på samme PCB Beskrivelse er IKKE for store controllere CommManager LevelManager De fleste eHouse controllere stik er dobbelt række IDC med forskellige mængder af stifter, for nem installation og hurtig tilslutning, og sørge for nem installation ved anvendelse af tape- monteret flad med sammenbidte IDC stik på enderne særlig crimper stik ID.
Connectors of Ethernet controllers Description refers to average Ethernet controllers: EthernetRoomManager EthernetHeatManager EthernetSolarManager Other dedicated Ethernet controllers based on the same PCB Description is NOT for big controllers CommManager LevelManager Most eHouse controllers connectors are double row IDC with different amounts of pins, for easy installation and quick connection, and to provide for easy installation through the use of tape-mounted flat with clenched IDC connectors on the ends special crimper connector ID.