Eksempler på brug af Foam concrete på Engelsk og deres oversættelser til Dansk
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
A few of the applications of foam concrete are.
Wooden houses, foam concrete and frame, as well as the small brick.
The foundation can be constructed from foam concrete or brick.
Provides materials for foam concrete used for geotech applications, backfills and road replacement.
Power applied to the wood layer should not exceed 9 mm in size,in the processing of foam concrete and brick walls 5 mm.
Disadvantages of foam concrete foundation elements.
Foam concrete is produced in a variety of densities from 200 kg/m³ to 1,600 kg/m³ depending on the application.
The special structure of products from foam concrete dictatesthe use of specific finishing methods.
Foam concrete compounds utilising fly ash in the slurry mix is cheaper still, and has less environmental impact.
It has a similar structure with foam concrete, thus finishing it is associated with the same problems.
As can act as a finish coating andpaving slabs andasphalt concrete and foam concrete, and even lawn grass.
About 3.5 cm every two Foam concrete to be placed into a number of horizontal seams metal reinforcing mesh.
Plaster- the most appropriate optionfinish interior surfaces and facade cladding of foam concrete and aerated concrete building structures.
Foam concrete- A new material, which by its solidity andIt resembles concrete durability, and the structure and weight- foam. .
For installation flush in the walls of foam concrete, aerated concrete brick making horizontal and vertical Stroebe.
Foam concrete is a versatile building material with a simple production method that is relatively inexpensive compared to autoclave aerated concrete. .
This is due to the unstable foam bubbles resulted in foam concrete having properties unsuitable for producing very low density.
The density of foam concrete usually varies from 400 kg/m³ to 1600 kg/ m³. The density is normally controlled by substituting fully or part of the fine aggregate with foam.
As mostly no coarse aggregate is used for production of foam concrete the correct term would be called mortar instead of concrete; .
Foam concrete is fire resistant, and its thermal and acoustical insulation properties make it ideal for a wide range of purposes, from insulating floors and roofs, to void filling.
The randomness of the distribution of the cells in the foam concrete determines the unevenness of the technical characteristics of the material.
The modern market offers a huge selectionmaterials for thermal insulation,the most common include fiberglass and polystyrene plates, foam concrete, foam glass, mineral wool.
The production technology is low tide foam concrete array of large format and then cut into elements with the given customer or the size of the building standards.
The development of synthetic-enzyme based foaming agents, foam stability enhancing admixtures and specialised foam generating, mixing and pumping equipment has improved the stability of the foam and hence foam concrete, making it possible to manufacture as light as 75 kg/m³ density.
The porous structure of building blocks,made of foam concrete, is the basis of a set of qualities that attract builders and future owners of residential buildings.
Foam concrete, also known as aircrete, foamed concrete, foamcrete, cellular lightweight concrete or reduced density concrete, is defined as a cement based slurry, with a minimum of 20%(per volume) foam entrained into the plastic mortar.
Foamed concrete can be produced with dry densities of 400 to 1600 kg/m³, with 7-day strengths of approximately 1 to 10 N/mm² respectively.
Of all the finishing materials submitted by the customer to date, only a properly chosen and plastering can optimize the technical andoperational characteristics of insulating materials made of foamed concrete.
Topped with a fireplace can be a wide shelf,which is made of foamed concrete or wood.
Foamed concrete typically consists of a slurry of cement and fly ash or sand and water, although some suppliers recommend pure cement and water with the foaming agent for very lightweight mixes.