Mga halimbawa ng paggamit ng Dust concentration sa Ingles at ang kanilang mga pagsasalin sa Tagalog
{-}
-
Ecclesiastic
-
Colloquial
-
Computer
Outlet dust concentration.
A cartridge type dust collector can control the dust concentration under 50 mg/m3.
The dust concentration in the outlet.
The dust quantity is equal to the inlet dust concentration to be treated by the volume of air.
The dust concentration at the entrance.
On Wednesday, 23 May,meteorologists promise a slight decrease in temperature and dust concentration.
The dust concentration of the post in the workshop was.
The main technical parameters of the bag filter are air volume,gas temperature, dust concentration and humidity.
The effect of dust concentration and particles on the explosion.
According to the concentration of dust, the corona wire density can be configured to meet the high dust concentration.
Reduce the dust concentration on machine side and nozzle, eliminate the harm to workers health.
Factors such as humidity and chemistry,particle size, dust concentration, filtration speed and dust removal.
The dust concentration of the exit means the discharge concentration of the dust collector, indicating that the method is with the dust concentration at the entrance.
Bag filter has the following characteristics:(1) high dust removal efficiency,dust removal efficiency up to 99.99%, dust concentration of only 10 mg/m3; 2.
For bag filters, the dust concentration at entry will directly affect the following factors.
It is suitable for metallurgy, chemical engineering, building materials, electric power, grain processing, machinery and other departments, industrial furnaces orboilers, as purifying dust concentration.
When the operating elasticity is large, the dust concentration in the inlet gas has a large change, and the effect of dust removal efficiency is little;
The boiler pulse bag dust collector adopts the lower intake air, which plays the role of dust collecting, avoiding the dust gas directly scouring the bag,reducing the dust concentration of the dust gas, and prolonging the life of the filter bag and the pulse solenoid valve.
The size of the export dust concentration should be based on the requirements of the local environmental protection or the requirements of the users, and the discharge concentration of the bag type dust collector can generally reach below 50 g/Nm3.
The dust collector is a kind of dust removal equipment, which is designed for the high humidity,low dew point and high dust concentration by using the integrated mechanism of the principle of inertia collision and the combination of electrostatic adsorption.
According to the value of air volume,gas temperature and dust concentration in the process design, the relative dust collector model, that is, is the type of dust collector needed, according to the principle of slightly less than the numerical value in the technical performance table.
The filter material should be considered according to the temperature, temperature and chemical characteristics of the gas, the size, weight, shape,pecking property, dust concentration, filtration speed, ash cleaning method, discharge concentration and working system of bag type Dust Collector.
Therefore, it is necessary to carefully study the properties of dust and dust concentration, and determine the period and time of the dust cleaning according to the different methods of dust cleaning, and adjust the better ash cleaning parameters in the trial operation.
It can handle high concentration of dust below 100g/Nm3.
The essence is the stage of concentration of dust.
The concentration of dust in Cyprus is still above the norm.
Increasing the concentration of dust in the air in Cyprus is not the first time.
When the dust skeleton is used for a period of time, a lot of dust will appear on the equipment, so the equipment needs to carry out regular ash cleaning so thatit can be very effective under the economic resistance conditions, the concentration of dust in the equipment and the properties of the dust should be carefully studied.
Dedusting process 1 The process of capture and separation 1 the stage of capture andpassage The essence is the stage of concentration of dust Dust uniformly mixed or suspended in the carrier medium enters the dust removal space of the dust….
The dust removal efficiency is more than 99%, and the dust emission concentration can be stabilized below 50mg/m3.