Exemplos de uso de All disks em Inglês e suas traduções para o Português
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
JBOD: Data is spanned across all disks.
All disks but one could be damaged without endangering your data.
Displays a list of basic and dynamic volumes on all disks.
Prints information about all disks or partitions.
All disks belonging to the series Momentus and Barracuda have a guarantee of 5 years.
Through these openings you will pass an elastic band which will hold all disks together.
This test lists all disks that are visible to one or more tested servers.
This means that disk reads from a RAID3 implementation access all disks in the array.
In this case, all disks containing a partition(belonging to an activated volume group) cannot be repartitioned.
Inventory and two tests that are described in this topic,List All Disks and List Cluster Disks. .
All disks need to be moved to and installed on the new RAID expansion enclosure to correctly access data.
The file size should be large than block size x Number of all disks- number of parity disks. .
Since the late 1980s, nearly all disks sold have embedded microcontrollers and either an ATA, Serial ATA, SCSI, or Fibre Channel interface.
Offer an effective way to save your time instead of defragmenting the all disks on whole computer every time.
Finally, RAID 0 is fastest butloses data in all disks after any single disk fails, so is generally not a good choice if you have no other backup source.
In a full server recovery,if you choose to reformat and repartition all disks, the existing data will be deleted.
The parity disk is not static(that would be called RAID4), but is changing periodically,so the parity information is distributed equally on all disks.
Decide about RAID level. RAID 1 mirrors the content in all disks, offering the most reliability with capacity of the single disk only.
If you are moving spanned, striped, mirrored, orRAID-5 volumes, it is highly recommended that you move all disks containing the volume together.
After reset andsuccessful check of all disks on mistakes if those were revealed and are not corrected by system automatically, it is necessary to make diagnostics by means of special programs from the producer or specialized utilities.
It will be automatically mounted therefore at once after its creation you will see it in the list of all disks which are established in system.
You can also use the mpclaim command at a command prompt to set the MPIO load balancing policy for a single disk, all disks, or if you preconfigure the policy,you can set the default policy that is applied to all disks that are discovered with a particular hardware ID.
Its intended use more common is to increase the performance of the system, or you can also reuse of low-capacity volumes creating with them one of greater size and performance, Since we wrote andread simultaneously in all disks at the same time.
Having put or having cleaned a tag opposite to the option Disconnect System Recovery on all disks, you respectively make active or disconnect restoration.
Dynamic striping across all devices to maximize throughput means that as additional devices are added to the zpool,the stripe width automatically expands to include them; thus, all disks in a pool are used, which balances the write load across them.
The above settings will automatically mount any storage device you connect/insert andalso mount all disks on bootup that were mounted previously.
Incorrect operation: During a system restore operation,you might wrongly select to format all disks and end up erasing pictures from hard drive.
This mode is quick anddata can be recovered only by long analysis of all disk, analyzing each cluster.
In the vulnerability report, Ormandy states that ESET NOD32 uses a minifilter orkext to hook up all disk I/O(input/output) information that is analyzed and then emulated if executable code is detected.
Compatible with all disk formats and burners.